Инструкция по настройке Openbox 7200 PVR

[Garry_Sh]

Подскажите, в чем трабла? опен 7200

22:08:49 192.168.1.100 [mg0] pid 0x177A failed to decode.
22:08:49 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:49 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:49 192.168.1.100 [mg0] pid 0x0FAA failed to decode.
22:08:49 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:49 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:48 192.168.1.100
22:08:48 192.168.1.100 Idents: 020710 023700 030600
22:08:48 192.168.1.100 Userid 105 caid 500 providers 3
22:08:48 192.168.1.100 [newcamd] Card data from 78.************:4000 (237ms):
22:08:48 192.168.1.100 [newcamd] Login to 78.************:4000 as avik01 accepted (118ms)
22:08:48 192.168.1.100 [newcamd] Connecting to 78.************:4000...
22:08:47 192.168.1.100 [mg0] pid 0x177A failed to decode.
22:08:47 192.168.1.100 [newcamd] no answer from 78.************:4000 for last 5 messages
22:08:47 192.168.1.100 [mg0] pid 0x0FAA failed to decode.
22:08:47 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:47 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:46 192.168.1.100 [mg0] pid 0x177A failed to decode.
22:08:46 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:46 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:45 192.168.1.100 [mg0] pid 0x0FAA failed to decode.
22:08:45 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:45 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:44 192.168.1.100 [mg0] pid 0x177A failed to decode.
22:08:44 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:44 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:44 192.168.1.100 [mg0] pid 0x0FAA failed to decode.
22:08:44 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:44 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:42 192.168.1.100 [mg0] pid 0x177A failed to decode.
22:08:42 192.168.1.100 [mg0] network can't decode
22:08:42 192.168.1.100 [mg0] cant send ecm to newcamd 78.************:4000 : -1
22:08:42 192.168.1.100 [mg0] -> ECM to newcamd 78.************:4000
22:08:42 192.168.1.100 [mg0] No viaccess key(s) found for id 20710 keynr 08
22:08:42 192.168.1.100
22:08:42 192.168.1.100 Idents: 020710 023700 030600
22:08:42 192.168.1.100 Userid 24 caid 500 providers 3
22:08:42 192.168.1.100 [newcamd] Card data from 78.************:4000 (231ms):
22:08:42 192.168.1.100 [newcamd] Login to 78.************:4000 as avik01 accepted (115ms)
22:08:42 192.168.1.100 [mg0] pid 0x0FAA failed to decode.
22:08:42 192.168.1.100 [mg0] network can't decode
22:08:42 192.168.1.100 [mg0] No viaccess key(s) found for id 23700 keynr 08
22:08:42 192.168.1.100 ECM: CaID: 0x0500 -> CaPID: 0x177A ProvID: 020710
22:08:42 192.168.1.100 ECM: CaID: 0x0500 -> CaPID: 0x0FAA ProvID: 023700
22:08:42 192.168.1.100 [mg0] service 2B66 index 0 pmt pid 0 (1)
22:08:42 192.168.1.100 [newcamd] Connecting to 78.************:4000...
22:08:42 192.168.1.100 [mgcamd] tps update started.
22:08:42 192.168.1.100 [mgcam] emm thread started
22:08:42 192.168.1.100 newcamd keep alive: 120, incoming port: 0
22:08:42 192.168.1.100 [config] newcamd route = avik01:78.************:4000 server cardserv