НАСТРОЙКА MPCS

[danzz]

Сообщение от shara

строку вот так пропишите, если у вас 2-й ком порт

[serial]
Device=gi://tuner@/dev/ttyS3

Прописал. Лишнее удалил. Вроде я где-то близко.Вот лог:
2011/06/13 19:45:13 5228 s >> STREAMBOARD << mp-cardserver started
2011/06/13 19:45:13 5228 s Cannot open file "./mpcs.sid" (errno=2)
2011/06/13 19:45:13 5228 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2011/06/13 19:45:13 5228 s signal handling initialized (type=sysv)
2011/06/13 19:45:13 5228 s 2719 service-id's loaded
2011/06/13 19:45:13 5228 s 28 lengths for caid guessing loaded
2011/06/13 19:45:13 5228 s monitor: disabled
2011/06/13 19:45:13 5228 s camd 3.3x: disabled
2011/06/13 19:45:13 5228 s camd 3.5x: disabled
2011/06/13 19:45:13 5228 s cs378x: initialized (fd=6, port=1)
2011/06/13 19:45:13 5228 s newcamd: disabled
2011/06/13 19:45:13 5228 s radegast: disabled
2011/06/13 19:45:13 5228 s logger started (pid=4616)
2011/06/13 19:45:13 5228 s resolver started (pid=4704, delay=30 sec)
2011/06/13 19:45:13 5228 s anti cascading disabled
2011/06/13 19:45:13 5228 s serial: initialized (pid=5904, gi@/dev/ttyS3)
2011/06/13 19:45:14 5904 c01 send init to GI:
2011/06/13 19:45:14 5904 c01 11 04 01 01 05 00 01 02 37 00 02 01 03


Подскажите, что еще сделать?