Помогите плиз настроить Openbox s7

[Jin]

Корректировка:
Если включать из обычного stand by, то пишет не "сигнал закодирован", а "Нет Сигнала (Tuner 1)".
Вот лог openbox explorer, который стартует, если в плугинах остановить работающих mg camd и стартануть его.
21:02:56 192.168.0.182 [mg] Net:1:1:2:5s Show ecm:1, emm:1 Up:0 Au:0 Dir:0 Osd:no:8080:0 Cache:7 Log:1:192.168.0.122:514 Reread:0
21:02:56 192.168.0.182 [mg] Ecm cache time: 20
21:02:56 192.168.0.182 Box type: openbox/stapi
21:02:56 192.168.0.182 Conax.Key error 2: No such file or directory
21:02:56 192.168.0.182 Keys readed
21:02:56 192.168.0.182 Conax.Key error 2: No such file or directory
21:02:56 192.168.0.182 [config] newcamd route = Jin:85.17.77.3:4000 server cardserv
21:02:56 192.168.0.182 newcamd keep alive: 0, incoming port: 0
21:02:56 192.168.0.182 [mgcam] emm thread started
21:02:56 192.168.0.182 [newcamd] Connecting to 85.17.77.3:4000...
21:02:56 192.168.0.182 [newcamd] Login to 85.17.77.3:4000 as Jin accepted (52ms)
21:02:56 192.168.0.182 [newcamd] Card data from 85.17.77.3:4000 (109ms):
21:02:56 192.168.0.182 Userid 185 caid 500 providers 2
21:02:56 192.168.0.182 Idents: 023700 030600


Далее, делаем полное отключение (долгое удержание кнопки stand by). Запускаем, грузится и видим на экране уже "Канал Закодирован". Идем в плугины, там включаем незапущенный mg camd и вуаля. Сразу же продолжается лог:
21:05:11 192.168.0.182 [mgcamd] signal 15 received
21:06:20 192.168.0.182 [mg] Net:1:1:2:5s Show ecm:1, emm:1 Up:0 Au:0 Dir:0 Osd:no:8080:0 Cache:7 Log:1:192.168.0.122:514 Reread:0
21:06:20 192.168.0.182 [mg] Ecm cache time: 20
21:06:20 192.168.0.182 Box type: openbox/stapi
21:06:20 192.168.0.182 Conax.Key error 2: No such file or directory
21:06:20 192.168.0.182 Keys readed
21:06:20 192.168.0.182 Conax.Key error 2: No such file or directory
21:06:20 192.168.0.182 [config] newcamd route = Jin:85.17.77.3:4000 server cardserv
21:06:20 192.168.0.182 newcamd keep alive: 0, incoming port: 0
21:06:20 192.168.0.182 [mgcam] emm thread started
21:06:20 192.168.0.182 [newcamd] Connecting to 85.17.77.3:4000...
21:06:20 192.168.0.182 [newcamd] Login to 85.17.77.3:4000 as Jin accepted (59ms)
21:06:20 192.168.0.182 [newcamd] Card data from 85.17.77.3:4000 (110ms):
21:06:20 192.168.0.182 Userid 185 caid 500 providers 2
21:06:20 192.168.0.182 Idents: 023700 030600
21:06:20 192.168.0.182
21:06:32 192.168.0.182 [mg1] service 2F49 index 1 pmt pid 0 (1)
21:06:32 192.168.0.182 [mg1] ECM: CaID: 0x0500 -> CaPID: 0x0BBD ProvID: 030600
21:06:32 192.168.0.182 [mg1] -> ECM to newcamd 85.17.77.3:4000
21:06:32 192.168.0.182 [mg1] <- CW from newcamd 85.17.77.3:4000 (55ms)
21:06:32 192.168.0.182 [mg1] 55 msec -- Fri Jan 7 19:05:42 2011
21:06:32 192.168.0.182 ===== Viaccess ECM on CaID 0x0500, pid 0x0bbd ======
21:06:32 192.168.0.182 prov: 030600
21:06:32 192.168.0.182 cw0:1 CE 36 A4 A8 A6 0B ED 9E
21:06:32 192.168.0.182 cw1:1 DE 25 AD B0 12 1C 70 9E
21:06:40 192.168.0.182 [mg1] -> ECM to newcamd 85.17.77.3:4000
21:06:40 192.168.0.182 [mg1] <- CW from newcamd 85.17.77.3:4000 (604ms)
21:06:40 192.168.0.182 [mg1] 604 msec -- Fri Jan 7 19:05:51 2011
21:06:40 192.168.0.182 ===== Viaccess ECM on CaID 0x0500, pid 0x0bbd ======
21:06:40 192.168.0.182 prov: 030600
21:06:40 192.168.0.182 cw0:1 1D 9A 75 2C FF 61 09 69
21:06:40 192.168.0.182 cw1:1 DE 25 AD B0 12 1C 70 9E

в файле /var/etc/start.sh у меня:

#! /bin/bash

for CONFFILE in /var/etc/init.d/*.sh; do
#echo "Starting $CONFFILE:"
$CONFFILE $1
done

echo
exit 0