НАСТРОЙКА MPCS

[waker]

Попробовал настроить Showtime, не пойму где ошибка
[global]
Nice = -20
LogFile = d:\Showtime.doc
#LogFile = /dev/tty
ShowEcmDw = 1
ClientTimeout = 5
LogFile = stdout
[serial]
Device = tunerShowtime@/dev/ttyS1?delay=1&timeout=1000

[reader]
Label = Showtime
Protocol = newcamd
Key = 0102030405060708091011121314
Device = xxxxx,4010
Account = xxxx,xxxx
CAID = 0604
IDENT = 0604:000000
Fallback = 0
Group = 1
ReconnectTimeout = 40

[account]
User = tunerShowtime
Pwd = tunerShowtime
#Uniq = 1
Group = 1
IDENT = 0604:000000

2010/07/24 12:57:33 1232 s >> STREAMBOARD << mp-cardserver started
2010/07/24 12:57:33 1232 s Cannot open file "./mpcs.sid" (errno=2)
2010/07/24 12:57:33 1232 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/07/24 12:57:33 1232 s signal handling initialized (type=sysv)
2010/07/24 12:57:33 1232 s 2593 service-id's loaded
2010/07/24 12:57:33 1232 s 25 lengths for caid guessing loaded
2010/07/24 12:57:33 1232 s monitor: disabled
2010/07/24 12:57:33 1232 s camd 3.3x: disabled
2010/07/24 12:57:33 1232 s camd 3.5x: disabled
2010/07/24 12:57:33 1232 s cs378x: disabled
2010/07/24 12:57:33 1232 s newcamd: disabled
2010/07/24 12:57:33 1232 s radegast: disabled
2010/07/24 12:57:33 1232 s logger started (pid=1816)
2010/07/24 12:57:33 1232 s resolver started (pid=3848, delay=30 sec)
2010/07/24 12:57:33 1232 s proxy started (pid=2600, server=xxxxx)
2010/07/24 12:57:33 1232 s anti cascading: disabled
2010/07/24 12:57:33 2600 p02 proxy xxxx:4010 newcamd525 (fd=4)
2010/07/24 12:57:33 1232 s serial: initialized (pid=2748, auto@/dev/ttyS0)


После этого не идет detected dsr9500-extended type receiver и так далее
Использую Openbox sw5.41
На Octagon SF918 через HSIC получилось. Проблема в sw.5.41?

Вопрос по HD каналам: Octagon при сканировании не пишет имя, а идент идет 1708
входят ли HD каналы в подписку?
спасибо за помощь