Помогите плиз настроить Openbox s7

[explorer]

Сообщение от Andy103

Когда вписываю на компьютере такой же адрес как и на ресивере, то пишет, что сеть неопознана компьютер с таким адресом уже есть в сети. Получается, что в сеть он выходит...

ну а что же вы хотели, у вас два устройства в сети с одинаковыми айпишниками!!!

[Andy103]

Да что вы в самом деле..... Все я правильно вписывал. Это я для примера - в сети ресивеи или нет.

[Serg66]

раз ты в него входишь по фтп, то ясен пень - ресивер в сети

[Andy103]

Сообщение от Serg66

раз ты в него входишь по фтп, то ясен пень - ресивер в сети

Да, все идет к тому. Звонил в сервисную службу по модему - сказали все должно работать.
Может все-таки в настройках что-то не так?

[Serg66]

давай разбираться
если в модеме ты не отключал DHCP (обычно по умолчанию включено), то в ресивере тоже можно включить DHCP и все назначится автоматом, но, когда у меня был S7, то была какая-то проблема с этим, надо было в модеме прописывать разрешение ресиверу по макадресу
скорей всего это уже поправили, не знаю, давно не слежу

но по этой причине предлагаю вначале настроить сеть вручную
итак, у тебя такие айпи адреса
192.168.1.1 - модем
192.168.1.2 - компьютер
192.168.1.3 - ресивер
255.255.255.0 - маска
(больше в сети устройств нет)

настрой как на картинке (IP модема можно ставить днсом, если в самом модеме настроен днс)

[Andy103]

Все именно так в ресивере и настроено. DHCP модема в сервисной службе сказали отключить

[Serg66]

Сообщение от Andy103

DHCP модема в сервисной службе сказали отключить

значит только ручные настройки

ресивер пробовал перезагрузить (кнопкой сзади) после настройки?

[Andy103]

Да. Ничего не показывает...

[Serg66]

а у тебя других пакетов нет, кроме платформы?

[Andy103]

Сообщение от Serg66

а у тебя других пакетов нет, кроме платформы?

Есть, но они тоже не идут...

 
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:1:1:2:5s Show ecm:1, emm:0 Up:0 Au:0 Dir:0 Osd:no:80:0 Cache:7 Log:4:192.168.1.3:514 Reread:0
[mg] Ecm cache time: 3600
Box type: openbox/stapi
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = Andy:91.194.76.159:4000
[config] newcamd route = Andy:91.194.76.159:4001
[config] newcamd route = Andy:91.194.76.159:4002
[config] newcamd route = Andy:91.194.76.159:4006
[config] newcamd route = Andy:91.194.76.159:4008
[config] newcamd route = Andy:91.194.76.159:4012
[config] newcamd route = Andy:91.194.76.159:4014
newcamd keep alive: 120, incoming port: 0
[mgcam] emm thread started
[newcamd] Connecting to 91.194.76.159:4000...
[mg1] service 2C7 index 1 pmt pid 0 (1)
[newcamd] Connecting to 91.194.76.159:4001...
[newcamd] Connecting to 91.194.76.159:4002...
[newcamd] Connecting to 91.194.76.159:4006...
[newcamd] Connecting to 91.194.76.159:4008...
[newcamd] Connecting to 91.194.76.159:4012...
[newcamd] Connecting to 91.194.76.159:4014...
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 4EF5 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 4EF5 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 4EF5 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 46 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[newcamd] Connection to 91.194.76.159:4000 failed (390795881ms)
[newcamd] Connection to 91.194.76.159:4001 failed (390795882ms)
[newcamd] Connection to 91.194.76.159:4002 failed (390795885ms)
[newcamd] Connection to 91.194.76.159:4006 failed (390795886ms)
[newcamd] Connection to 91.194.76.159:4008 failed (390795888ms)
[newcamd] Connection to 91.194.76.159:4012 failed (390795890ms)
[newcamd] Connection to 91.194.76.159:4014 failed (390795891ms)
[mg1] stoping camd..
[mg1] service 46 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 1D63 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0024 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0020 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0024 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0020 failed to decode.
[mg1] stoping camd..
[mg1] service 1D62 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0027 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0026 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0027 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0026 failed to decode.
[mg1] stoping camd..
[mg1] service 5A index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 1AF3 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0B00  -> CaPID: 0x0B67 ProvID: 000000
[mg1] ECM: CaID: 0x0BAA  -> CaPID: 0x0C67 ProvID: 000000
[mg1] No conax key(s) found for id 0 keynr 20
[mg1] network can't decode
[mg1] pid 0x0B67 failed to decode.
[mg1] No conax key(s) found for id 0 keynr 20
[mg1] network can't decode
[mg1] pid 0x0C67 failed to decode.
[mg1] stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0021 ProvID: 000000
[mg1] ECM: CaID: 0x0500  -> CaPID: 0x0026 ProvID: 042700
[mg1] ECM: CaID: 0x0500  -> CaPID: 0x0035 ProvID: 042740
[mg1] network can't decode
[mg1] pid 0x0021 failed to decode.
[mg1] No viaccess key(s) found for id 42700 keynr 08
[mg1] network can't decode
[mg1] pid 0x0026 failed to decode.
[mg1] No viaccess key(s) found for id 42740 keynr 08
[mg1] network can't decode
[mg1] pid 0x0035 failed to decode.
[mg1] stoping camd..
[mg1] service DB6 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0B00  -> CaPID: 0x0079 ProvID: 000000
[mg1] ECM: CaID: 0x09AF  -> CaPID: 0x0077 ProvID: 000000
[mg1] No conax key(s) found for id 0 keynr 58
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0077 failed to decode.
[mg1] stoping camd..
[mg1] service DAE index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0BAA  -> CaPID: 0x0083 ProvID: 000000
[mg1] ECM: CaID: 0x0500  -> CaPID: 0x0066 ProvID: 024300
[mg1] No conax key(s) found for id 0 keynr 20
[mg1] network can't decode
[mg1] pid 0x0083 failed to decode.
[mg1] No viaccess key(s) found for id 24300 keynr 08
[mg1] network can't decode
[mg1] pid 0x0066 failed to decode.
[mg1] stoping camd..
[mg1] service D4 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0B00  -> CaPID: 0x0590 ProvID: 000000
[mg1] ECM: CaID: 0x09AF  -> CaPID: 0x0591 ProvID: 000000
[mg1] No conax key(s) found for id 0 keynr 58
[mg1] network can't decode
[mg1] pid 0x0590 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0591 failed to decode.
STAPI filter set error 81 pid 591
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 1149 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 14 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0034 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0035 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0034 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0035 failed to decode.
[mg1] stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 6A5 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0500  -> CaPID: 0x0969 ProvID: 042600
[mg1] No viaccess key(s) found for id 42600 keynr 08
[mg1] network can't decode
[mg1] pid 0x0969 failed to decode.
[mg1] stoping camd..
[mg1] service 6EA index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 4EF5 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 4EF5 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 1D4E index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0020 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0024 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0020 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0024 failed to decode.
[mg1] stoping camd..
[mg1] service 46 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:1:1:2:5s Show ecm:1, emm:0 Up:0 Au:0 Dir:0 Osd:no:80:0 Cache:7 Log:4:192.168.1.3:514 Reread:0
[mg] Ecm cache time: 3600
Box type: openbox/stapi
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = Andy:91.194.76.159:4000
[config] newcamd route = Andy:91.194.76.159:4001
[config] newcamd route = Andy:91.194.76.159:4002
[config] newcamd route = Andy:91.194.76.159:4006
[config] newcamd route = Andy:91.194.76.159:4008
[config] newcamd route = Andy:91.194.76.159:4012
[config] newcamd route = Andy:91.194.76.159:4014
newcamd keep alive: 120, incoming port: 0
[mgcam] emm thread started
[newcamd] Connecting to 91.194.76.159:4000...
[mg1] service 2C7 index 1 pmt pid 0 (1)
[newcamd] Connecting to 91.194.76.159:4001...
[newcamd] Connecting to 91.194.76.159:4002...
[newcamd] Connecting to 91.194.76.159:4006...
[newcamd] Connecting to 91.194.76.159:4008...
[newcamd] Connecting to 91.194.76.159:4012...
[newcamd] Connecting to 91.194.76.159:4014...
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 46 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service 50 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1  -> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079 failed to decode.
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[newcamd] Connection to 91.194.76.159:4000 failed (392403251ms)
[newcamd] Connection to 91.194.76.159:4001 failed (392403252ms)
[newcamd] Connection to 91.194.76.159:4002 failed (392403253ms)
[newcamd] Connection to 91.194.76.159:4006 failed (392403254ms)
[newcamd] Connection to 91.194.76.159:4008 failed (392403255ms)
[newcamd] Connection to 91.194.76.159:4012 failed (392403256ms)
[newcamd] Connection to 91.194.76.159:4014 failed (392403257ms)
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service E1A index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 1149 index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1] stoping camd..
[mg1] service 1150 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x1803  -> CaPID: 0x066E ProvID: 000000
[mg1] ECM: CaID: 0x0100  -> CaPID: 0x0A48 ProvID: 000068
[mg1] ECM: CaID: 0x1813  -> CaPID: 0x0A48 ProvID: 000000
[mg1] ECM: CaID: 0x0B01  -> CaPID: 0x0A52 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x066E failed to decode.
[mg1] No seca key(s) found for id 68 keynr 0c
[mg1] network can't decode
[mg1] pid 0x0A48 failed to decode.
[mg1] No nagra2 key(s) found for id 7 keynr 01
[mg1] network can't decode
[mg1] pid 0x0A48 failed to decode.
[mg1] No conax key(s) found for id 0 keynr 20
[mg1] network can't decode
[mg1] pid 0x0A52 failed to decode.
[mg1] stoping camd..
[mg1] service 114F index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x1803  -> CaPID: 0x066C ProvID: 000000
[mg1] ECM: CaID: 0x0100  -> CaPID: 0x0A47 ProvID: 000068
[mg1] ECM: CaID: 0x1813  -> CaPID: 0x0A47 ProvID: 000000
[mg1] ECM: CaID: 0x0B01  -> CaPID: 0x0A51 ProvID: 000000
[mg1] network can't decode
[mg1] pid 0x066C failed to decode.
[mg1] No seca key(s) found for id 68 keynr 0c
[mg1] network can't decode
[mg1] pid 0x0A47 failed to decode.
[mg1] No nagra2 key(s) found for id 7 keynr 01
[mg1] network can't decode
[mg1] pid 0x0A47 failed to decode.
[mg1] No conax key(s) found for id 0 keynr 20
[mg1] network can't decode
[mg1] pid 0x0A51 failed to decode.
[mg1] stoping camd..
[mg1] service 1132 index 1 pmt pid 0 (1)
[mg1] ECM: CaID: 0x0100  -> CaPID: 0x0A2A ProvID: 000068
[mg1] ECM: CaID: 0x1813  -> CaPID: 0x0A2A ProvID: 000000
[mg1] No seca key(s) found for id 68 keynr 0c
[mg1] network can't decode
[mg1] pid 0x0A2A failed to decode.
[mg1] No nagra2 key(s) found for id 7 keynr 01
[mg1] network can't decode
[mg1] pid 0x0A2A failed to decode.

[Serg66]

может тебе настроить логирование на комп, а не на ресивер? в ресивере может уже логом все забито

[Andy103]

Сообщение от Serg66

может тебе настроить логирование на комп, а не на ресивер? в ресивере может уже логом все забито

Я стираю файл с ресивера. Моя папка var
Вложение 1177

[dimon73]

Для тех кто в бронепоезде:
как проверить наличие интернета в тюнере.Заходишь телнетом на рес и выполняешь команду
ping xxx.xxx.x.xxx
где xxx.xxx.x.xxx=какой нибудь внешний айпи,если пинг есть,то берем любую папку вар из последних,меняем на рекомендованные конфиги с этого сайта и смотрим кино.

[BGI]

Привет всем!Вижу так и нет кина.
Делай как напишу:
1.Выключи(выдерни) всё из розеток
2.Достань кабель из сетевой карты компа.
3.Этот конец кабеля вставь в рес
4.Включи только модем и дождись когда он загрузится.( только три глазка должно гореть)
5.Включи рес в сеть и дождись когда он загрузится (теперь на модеме только четыре глазка должно гореть)
6.Включи телик и если кина нет то модем настроен под ,,гостем,,т.е. brig. (Конечно при условии что в ресе всё прописано верно).

[Serg66]

х.з., фигня какая-то получается
может модем блокирует, хотя, комп ведь не блокирует
попробуй в ресивере шлюзом указать 192.168.1.2 (айпи компа)

[BGI]

Andy103 читай личку и пиши в аску-будем настраивать.

[BGI]

Помните и Обязательно присвойте атрибут 755 файлу start.sh который находится в категории /var/etc Иначе mgcamd не будет стартовать автоматом!!!

[Andy103]

Все стало показывать. Оказалось проблема, что модем не был правильно настроен в режим роутера. Большое спасибо за помощь в настройке BGI.

[BGI]

Приятного просмотра

[Serg66]

Andy103
еще вчера BGI предлагал тебе поменять местами кабеля
предполагалось, что ты это сделал и для ресивера получил отрицательный результат, а ты, оказывается, х.. положил на эту просьбу