ВЛАДЕЛЬЦАМ DREAMBOXов и прочих ресиверов на ЛИНУКСЕ.

[jurez26]

да конечно ждал настройки:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 5 30

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 150 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } jurez ххххх

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 94.217.18.50 514 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 04 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 12000
CWS = 85.17.77.3 4014 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4000 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4001 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4002 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4003 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4004 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4005 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4006 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4007 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4008 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4009 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4010 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4011 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4012 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4013 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4015 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4016 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4017 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4018 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4019 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4020 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4021 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4022 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4023 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4024 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4025 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4026 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4027 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4028 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4029 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 4500 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 5000 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 5001 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 85.17.77.3 3999 jurez хххххх 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_CONNECT_TIMEOUT = 120
CWS_KEEPALIVE =120
wan newcs
перестартовывал уже несколько раз

[jurez26]

дрим 800хд мгкамд 1,35а

[telez]

Идей нету, либо лог нужен https://forum.rlst.tv/showthread.php?t=290
либо поменять сервер,группу в билинге, подаждать 15 ,ну и ещё раз попробывать

[jurez26]

а как этот лог снять я давно както пробовал не так и не получилось слить ево в файл

[jurez26]

[telez]

Сообщение от jurez26

а как этот лог снять я давно както пробовал не так и не получилось слить ево в файл

Я страничку вам дал где можно почитать,одно добавлю я пользуюсь програмкой 3CDaemon
L: { 01 } 94.217.18.50 514 /tmp/mgcamd.log сдесь нужно прописать ай пи Вашего компютера.
Можно и файл,а можно скопировать,а потом выложить ма форум обычным текстом,примерно так.

[jurez26]

Jan 1 20:46:54 dm800 syslog.info syslogd started: BusyBox v1.15.3
Jan 1 20:46:54 dm800 user.notice kernel: klogd started: BusyBox v1.15.3 (2010-07-21 18:00:33 CEST)
Jan 1 20:46:54 dm800 user.info kernel: (ret 0)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: first pts 0x0
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: framerate changed 3
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: resolution changed (1280 720)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: aspect changed 3
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 daemon.debug gdaemon: incoming message
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 0
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: stop decode
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 0
Jan 1 20:46:54 dm800 user.warn kernel: no decoder left in sync handling so disable xpt_sync
Jan 1 20:46:54 dm800 user.warn kernel: 5723 ms: 24
Jan 1 20:46:54 dm800 user.warn kernel: 21 ms: 25
Jan 1 20:46:54 dm800 user.warn kernel: 21 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 128 ms: 37 Starting /etc/rcS.d/S10tpmd...
Jan 1 20:46:54 dm800 user.warn kernel: 21 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 38 ms: 40 Starting /etc/rcS.d/S20modutils.sh...
Jan 1 20:46:54 dm800 user.warn kernel: 20 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 784 ms: 43 Starting /etc/rcS.d/S21avahi-daemon...
Jan 1 20:46:54 dm800 user.warn kernel: 21 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 78 ms: 46 Starting /etc/rcS.d/S38devpts.sh...
Jan 1 20:46:54 dm800 user.warn kernel: 20 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 1653 ms: 49 Starting /etc/rcS.d/S40networking...
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 0
Jan 1 20:46:54 dm800 user.warn kernel: sync is off so we enable it
Jan 1 20:46:54 dm800 user.warn kernel: playback!
Jan 1 20:46:54 dm800 user.warn kernel: total video delay: 0 (0 ms)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: start decode
Jan 1 20:46:54 dm800 user.warn kernel: flush video decoder
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: first pts 0x0
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 0
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: stop decode
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 0
Jan 1 20:46:54 dm800 user.warn kernel: no decoder left in sync handling so disable xpt_sync
Jan 1 20:46:54 dm800 user.notice kernel: JFFS2 notice: (722) check_node_data: wrong data CRC in data node at 0x037db800: read 0x4dc867d4, calculated 0x3a7e38d7.
Jan 1 20:46:54 dm800 user.info kernel: bcmfb: enable manual blit
Jan 1 20:46:54 dm800 user.info kernel: bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: 18931 ms: =s
Jan 1 20:46:54 dm800 user.warn kernel: 9 ms: 50
Jan 1 20:46:54 dm800 user.warn kernel: 452 ms: 50
Jan 1 20:46:54 dm800 user.warn kernel: 75 ms: 50
Jan 1 20:46:54 dm800 user.warn kernel: 46 ms: 50
Jan 1 20:46:54 dm800 user.warn kernel: 2388 ms: 50
Jan 1 20:46:54 dm800 user.warn kernel: 1074 ms: 51
Jan 1 20:46:54 dm800 user.warn kernel: alps_bsbe2 is in powersave mode now
Jan 1 20:46:54 dm800 user.warn kernel: 1809 ms: 52
Jan 1 20:46:54 dm800 user.warn kernel: 414 ms: 53
Jan 1 20:46:54 dm800 user.warn kernel: 24 ms: 53
Jan 1 20:46:54 dm800 user.warn kernel: 3 ms: 53
Jan 1 20:46:54 dm800 user.warn kernel: 1270 ms: 53
Jan 1 20:46:54 dm800 user.warn kernel: 4 ms: 54
Jan 1 20:46:54 dm800 user.warn kernel: 260 ms: 54
Jan 1 20:46:54 dm800 user.warn kernel: 760 ms: 54
Jan 1 20:46:54 dm800 user.warn kernel: 1916 ms: 54
Jan 1 20:46:54 dm800 user.warn kernel: 41 ms: 55
Jan 1 20:46:54 dm800 user.warn kernel: 3 ms: 55
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 55
Jan 1 20:46:54 dm800 user.warn kernel: 249 ms: 55
Jan 1 20:46:54 dm800 user.warn kernel: 50 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 314 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 4 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 146 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 237 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 37 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 89 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 9 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 19 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 7348 ms: 56
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 60
Jan 1 20:46:54 dm800 user.warn kernel: 436 ms: 60
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 166 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 7 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 15 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 37 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 42 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 5 ms: 61
Jan 1 20:46:54 dm800 user.info kernel: bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Jan 1 20:46:54 dm800 user.warn kernel: 912 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 16 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 4:3
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(2)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 4:3
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(2)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 8 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set input to 0
Jan 1 20:46:54 dm800 user.warn kernel: set fb to 2(0)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 4:3
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 8 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(2)
Jan 1 20:46:54 dm800 user.warn kernel: set ac3 to downmix
Jan 1 20:46:54 dm800 user.warn kernel: 139 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 24 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 204 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 785 ms: 61
Jan 1 20:46:54 dm800 user.warn kernel: 97 ms: 62
Jan 1 20:46:54 dm800 user.warn kernel: 131 ms: 62
Jan 1 20:46:54 dm800 user.warn kernel: 4020 ms: 62
Jan 1 20:46:54 dm800 user.warn kernel: 16 ms: 64
Jan 1 20:46:54 dm800 user.warn kernel: 22 ms: 64
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set current avs auto aspect to 16:9
Jan 1 20:46:54 dm800 user.warn kernel: disable wss on display 0
Jan 1 20:46:54 dm800 user.warn kernel: set wss 7 on display 1
Jan 1 20:46:54 dm800 user.warn kernel: set sb to 3(1)
Jan 1 20:46:54 dm800 user.warn kernel: 10855 ms: 64
Jan 1 20:46:54 dm800 user.warn kernel: 51815 ms: 71
Jan 1 20:46:54 dm800 user.warn kernel: 127 ms: 99
Jan 1 20:46:54 dm800 user.warn kernel: set mute 0 (000) 1
Jan 1 20:46:54 dm800 user.warn kernel: 152 ms: 99
Jan 1 20:46:54 dm800 user.warn kernel: 42 ms: 99
Jan 1 20:46:54 dm800 user.warn kernel: alps_bsbe2 is in normal mode now
Jan 1 20:46:54 dm800 user.warn kernel: pilot_off!
Jan 1 20:46:54 dm800 user.warn kernel: start pcr0 on dmx 0 pid:1ff index 5
Jan 1 20:46:54 dm800 user.warn kernel: start audio on dmx 0 pid:203
Jan 1 20:46:54 dm800 user.warn kernel: audio xpt start
Jan 1 20:46:54 dm800 user.warn kernel: sync is off so we enable it
Jan 1 20:46:54 dm800 user.warn kernel: demux-index 0 pcr0pid 1ff
Jan 1 20:46:54 dm800 user.warn kernel: using 5 as pcr0 pidchannel
Jan 1 20:46:54 dm800 user.warn kernel: AC3
Jan 1 20:46:54 dm800 user.warn kernel: audio: streamtype set 1
Jan 1 20:46:54 dm800 user.warn kernel: audio: streamtype_set: stop rave
Jan 1 20:46:54 dm800 user.warn kernel: decode
Jan 1 20:46:54 dm800 user.warn kernel: audio: streamtype_set: restart rave
Jan 1 20:46:54 dm800 user.warn kernel: set mute 0 (111) 1
Jan 1 20:46:54 dm800 user.warn kernel: audio: decoder start 2
Jan 1 20:46:54 dm800 user.warn kernel: video delay 0 (0 ms)
Jan 1 20:46:54 dm800 user.warn kernel: total video delay: 0 (0 ms)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set streamtype!
Jan 1 20:46:54 dm800 user.warn kernel: set H264
Jan 1 20:46:54 dm800 user.warn kernel: sw rave disabled!
Jan 1 20:46:54 dm800 user.warn kernel: start video0 on dmx 0 pid:1ff
Jan 1 20:46:54 dm800 user.warn kernel: total video delay: 0 (0 ms)
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: start decode
Jan 1 20:46:54 dm800 user.notice kernel: JFFS2 notice: (16) read_dnode: node CRC failed on dnode at 0x2d2add8: read 0xffffffff, calculated 0xe6cdaff5
Jan 1 20:46:54 dm800 user.notice kernel: JFFS2 notice: (16) check_node_data: wrong data CRC in data node at 0x03051800: read 0xf1665e62, calculated 0x6359063f.
Jan 1 20:46:54 dm800 user.warn kernel: stop pcr0 on dmx 0 pid:1ff
Jan 1 20:46:54 dm800 user.warn kernel: stop video0 on dmx 0 pid:1ff
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: stop decode
Jan 1 20:46:54 dm800 user.warn kernel: VIDEO0: set blank to 1
Jan 1 20:46:54 dm800 user.warn kernel: bcm_audio: got invalid pts (ret 0)!!
Jan 1 20:46:54 dm800 user.warn kernel: audio: decoder stop
Jan 1 20:46:54 dm800 user.warn kernel: stop audio on dmx 0 pid:203
Jan 1 20:46:54 dm800 user.warn kernel: audio: xpt stop(3)
Jan 1 20:46:54 dm800 user.warn kernel: no decoder left in sync handling so disable xpt_sync
Jan 1 20:46:54 dm800 user.warn kernel: bcm_audio_channel_stop(3) done
Jan 1 20:46:54 dm800 user.warn kernel: pilot_off!

[jurez26]

это лог?

[fed]

это не лог эмулятора, это мусор ненужный

[jurez26]

tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:1:1:2:7s Show ecm:1, emm:1 Up:1 Au:0 Dir:0 Osd:no:80:0 Cache:7 Log:4:94.217.18.50:514 Reread:0
[mg] Ecm cache time: 0
Box type: mips dreambox (dm7025, dm800)
/dev/dvb/adapter0/ca3 error 2: No such file or directory
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
ignore prov 0500:040600
ignore prov 0500:040610
ignore prov 0500:040620
ignore prov 0500:022600
ignore prov 0500:008000
ignore prov 0500:042100
ignore caid 4AE0
ignore prov 0600:000000
ignore prov 0600:000002
ignore prov 0600:000003
ignore prov 0600:000004
ignore prov 0600:000005
ignore prov 0600:000006
ignore prov 0600:000007
ignore prov 0600:000008
ignore prov 0600:000009
ignore prov 0600:00000A
ignore prov 0600:00000B
ignore prov 0600:00000C
ignore prov 0600:00000D
ignore prov 0600:00000E
ignore prov 0600:00000F
ignore prov 0600:000010
ignore prov 0600:000011
ignore prov 0600:000012
ignore prov 0600:000013
ignore prov 0600:000016
ignore prov 0600:000037
ignore prov 0600:000070
ignore prov 0600:000071
ignore prov 0600:000072
ignore prov 0600:000073
ignore prov 0600:000074
ignore prov 0600:000075
ignore prov 0600:000076
ignore prov 0600:000079
priority prov 0500:023700
priority prov 0500:030600
priority prov 0600:000001
priority prov 0600:000077
priority prov 0600:000078
priority caid 4AE1
priority prov 0500:024B00
priority prov 0500:023100
priority prov 0500:032500
priority prov 0500:041700
priority prov 0500:042200
priority prov 0500:042700
priority prov 0500:042400
priority prov 0500:020810
priority prov 0600:000014
priority prov 0100:000000
priority prov 0100:000033
priority caid 090F
priority caid 093E
priority caid 0BAA
priority caid 0963
priority caid 093B
priority caid 09CD
priority caid 1702
priority caid 1830
priority caid 1722
priority caid 0B00
priority prov 0600:000015
priority prov 0600:00FFFF
priority prov 0600:000043
priority prov 0600:00001A
priority prov 0600:000002
priority prov 0600:000003
priority prov 0600:000004
priority prov 0600:000006
priority prov 0600:00000E
priority prov 0600:000002
priority prov 0600:000008
priority prov 0600:000009
priority prov 0600:00000C
priority prov 0600:00001A
priority prov 0600:000033
ecm replace 2F4A:0500:030600:0BBE -> 0000:000000:0000
ecm replace 2F45:0500:030600:0BB9 -> 0000:000000:0000
ecm replace 2F46:0500:030600:0BBA -> 0000:000000:0000
ecm replace 2F47:0500:030600:0BBB -> 0000:000000:0000
ecm replace 2F48:0500:030600:0BBC -> 0000:000000:0000
ecm replace 2F49:0500:030600:0BBD -> 0000:000000:0000
ecm replace 3715:0500:030600:0BB9 -> 0000:000000:0000
ecm replace 0082:0500:042200:1D8B -> 0000:000000:0000
ecm replace 0086:0500:042200:1D8C -> 0000:000000:0000
ecm replace 004A:0500:042200:1D8D -> 0000:000000:0000
ecm replace 004B:0500:042200:1D8E -> 0000:000000:0000
ecm replace 35C0:0500:042700:0530 -> 0000:000000:0000
ecm replace 35C1:0500:042700:0531 -> 0000:000000:0000
ecm replace 35C2:0500:042700:0532 -> 0000:000000:0000
ecm replace 35C4:0500:042700:0533 -> 0000:000000:0000
ecm replace 35C3:0500:042700:0539 -> 0000:000000:0000
ecm replace 35C6:0500:042700:0534 -> 0000:000000:0000
ecm replace 35C7:0500:042700:0535 -> 0000:000000:0000
ecm replace 35C8:0500:042700:0536 -> 0000:000000:0000
ecm replace 278A:0500:042700:0536 -> 0000:000000:0000
ecm replace 1251:0500:032500:02B3 -> 0000:000000:0000
ecm replace 000A:4AE1:000000:0078 -> 0000:000000:0000
ecm replace 0050:4AE1:000000:0078 -> 0000:000000:0000
ecm replace 0028:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 0032:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 0046:4AE1:000000:0078 -> 0000:000000:0000
ecm replace 0014:4AE1:000000:0030 -> 0000:000000:0000
ecm replace 001E:4AE1:000000:006E -> 0000:000000:0000
ecm replace 005A:4AE1:000000:0078 -> 0000:000000:0000
ecm replace 0064:4AE1:000000:0078 -> 0000:000000:0000
ecm replace 003C:4AE1:000000:0026 -> 0000:000000:0000
ecm replace 0078:4AE1:000000:0026 -> 0000:000000:0000
ecm replace 000A:4AE1:000000:0021 -> 0000:000000:0000
ecm replace 0014:4AE1:000000:0022 -> 0000:000000:0000
ecm replace 001E:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D60:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 1D57:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 1D4F:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D59:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D54:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D53:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D55:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D50:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D51:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D52:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D56:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D58:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 1D5A:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D4E:4AE1:000000:0020 -> 0000:000000:0000
ecm replace 1D5B:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D5C:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D5D:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D5E:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D5F:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 1D4D:4AE1:000000:0023 -> 0000:000000:0000
ecm replace 1D62:4AE1:000000:0027 -> 0000:000000:0000
ecm replace 1D64:4AE1:000000:0020 -> 0000:000000:0000
caid replace 1833 -> 1702
ecm replace 0082:1833:000000:1BBC -> 1702:000000:0000
ecm replace 007F:1833:000000:1BB2 -> 1702:000000:0000
ecm replace 0080:1833:000000:1BB4 -> 1702:000000:0000
ecm replace 0083:1833:000000:1BB6 -> 1702:000000:0000
ecm replace 007E:1833:000000:1BB0 -> 1702:000000:0000
ecm replace 0081:1833:000000:1BBA -> 1702:000000:0000
ecm replace 0084:1833:000000:1BB8 -> 1702:000000:0000
ecm replace 0044:1702:000000:1BE0 -> 0000:000000:0000
ecm replace 000D:1702:000000:1B22 -> 0000:000000:0000
ecm replace 000C:1702:000000:1B66 -> 0000:000000:0000
ecm replace 000E:1702:000000:1B20 -> 0000:000000:0000
ecm replace 0034:1702:000000:1B68 -> 0000:000000:0000
ecm replace 0024:1702:000000:1B72 -> 0000:000000:0000
ecm replace 0009:1702:000000:1B48 -> 0000:000000:0000
ecm replace 002B:1702:000000:1B46 -> 0000:000000:0000
ecm replace 000A:1702:000000:1843 -> 0000:000000:0000
ecm replace 000B:1702:000000:1B44 -> 0000:000000:0000
ecm replace 0029:1702:000000:1B4C -> 0000:000000:0000
ecm replace 0017:1702:000000:1B40 -> 0000:000000:0000
ecm replace 0204:1702:000000:1B28 -> 0000:000000:0000
ecm replace 0010:1702:000000:1B82 -> 0000:000000:0000
ecm replace 0203:1702:000000:1BAC -> 0000:000000:0000
ecm replace 0032:1702:000000:1B9C -> 0000:000000:0000
ecm replace 002A:1702:000000:1B5E -> 0000:000000:0000
ecm replace 003C:1702:000000:1BD0 -> 0000:000000:0000
ecm replace 001B:1702:000000:1B1A -> 0000:000000:0000
ecm replace 0008:1702:000000:1B18 -> 0000:000000:0000
ecm replace 0014:1702:000000:1B1C -> 0000:000000:0000
ecm replace 001C:1702:000000:1B6E -> 0000:000000:0000
ecm replace 0022:1702:000000:1B6C -> 0000:000000:0000
ecm replace 0019:1702:000000:1B4E -> 0000:000000:0000
ecm replace 001A:1702:000000:1B64 -> 0000:000000:0000
ecm replace 0013:1702:000000:1B70 -> 0000:000000:0000
ecm replace 00A8:1702:000000:1BA0 -> 0000:000000:0000
ecm replace 00DF:1702:000000:1B0C -> 0000:000000:0000
ecm replace 00DD:1702:000000:1B6A -> 0000:000000:0000
ecm replace 00DE:1702:000000:1B8C -> 0000:000000:0000
ecm replace 0035:1702:000000:1B8E -> 0000:000000:0000
ecm replace 0011:1702:000000:1B00 -> 0000:000000:0000
ecm replace 0045:1702:000000:1AE2 -> 0000:000000:0000
ecm replace 0043:1702:000000:1BDE -> 0000:000000:0000
ecm replace 0016:1702:000000:1B60 -> 0000:000000:0000
ecm replace 003F:1702:000000:1AD6 -> 0000:000000:0000
ecm replace 000F:1702:000000:1B96 -> 0000:000000:0000
ecm replace 003D:1702:000000:1BD2 -> 0000:000000:0000
ecm replace 003E:1702:000000:1BD4 -> 0000:000000:0000
ecm replace 4462:1702:000000:1BC6 -> 0000:000000:0000
ecm replace 001D:1702:000000:1B4A -> 0000:000000:0000
ecm replace 4461:1702:000000:1BC4 -> 0000:000000:0000
ecm replace 0042:1702:000000:1BDC -> 0000:000000:0000
ecm replace 0006:0D06:0000C0:0502 -> 0000:000000:0000
ecm replace 000D:0D06:0000C0:0506 -> 0000:000000:0000
ecm replace 0001:0D06:0000C0:0506 -> 0000:000000:0000
ecm replace 000F:0D06:0000C0:0507 -> 0000:000000:0000
ecm replace 000A:0D06:0000C0:0504 -> 0000:000000:0000
ecm replace 0024:0D06:0000C0:0E18 -> 0000:000000:0000
ecm replace 0517:0D06:0000C0:03B9 -> 0000:000000:0000
ecm replace 000D:0D06:0000C0:0503 -> 0000:000000:0000
ecm replace 0010:0D06:0000C0:0DF0 -> 0000:000000:0000
ecm replace 0020:0D06:0000C0:0504 -> 0000:000000:0000
ecm replace 000B:0D06:0000C0:0504 -> 0000:000000:0000
ecm replace 001E:0D06:0000C0:0504 -> 0000:000000:0000
ecm replace 0005:0D06:0000C0:050A -> 0000:000000:0000
ecm replace 0025:0D06:0000C0:0507 -> 0000:000000:0000
ecm replace 0008:0D06:0000C0:0509 -> 0000:000000:0000
ecm replace 000E:0D06:0000C0:0507 -> 0000:000000:0000
ecm replace 000E:0D06:0000C0:0514 -> 0000:000000:0000
ecm replace 0003:0D06:0000C0:050E -> 0000:000000:0000
ecm replace 0033:0D06:0000C0:0508 -> 0000:000000:0000
ecm replace 07D6:0D06:0000C0:03BE -> 0000:000000:0000
ecm replace 0035:0D06:0000C0:0509 -> 0000:000000:0000
ecm replace 0003:0D06:0000C0:04FD -> 0000:000000:0000
ecm replace 0023:0D06:0000C0:0E0F -> 0000:000000:0000
ecm replace 0516:0D06:0000C0:03B8 -> 0000:000000:0000
ecm replace 000D:0D06:0000C0:0DDC -> 0000:000000:0000
ecm replace 000A:0D06:0000C0:0505 -> 0000:000000:0000
ecm replace 0001:0D06:0000C0:0500 -> 0000:000000:0000
ecm replace 001D:0D06:0000C0:04FF -> 0000:000000:0000
ecm replace 0006:0D06:0000C0:0DD2 -> 0000:000000:0000
ecm replace 0002:0D06:0000C0:0502 -> 0000:000000:0000
ecm replace 051A:0D06:0000C0:03BC -> 0000:000000:0000
ecm replace 0518:0D06:0000C0:03BA -> 0000:000000:0000
ecm replace 0519:0D06:0000C0:03BB -> 0000:000000:0000
ecm replace 0C30:093E:000000:0064 -> 0000:000000:0000
ecm replace 0474:093E:000000:00A2 -> 0000:000000:0000
ecm replace 047E:093E:000000:0097 -> 0000:000000:0000
ecm replace 04AB:093E:000000:00A6 -> 0000:000000:0000
ecm replace 0C26:093E:000000:0066 -> 0000:000000:0000
ecm replace 13BA:093E:000000:13EB -> 0000:000000:0000
ecm replace 047D:093E:000000:00A2 -> 0000:000000:0000
ecm replace 0487:093E:000000:0097 -> 0000:000000:0000
ecm replace 1130:093E:000000:1A99 -> 0000:000000:0000
ecm replace 0D66:093E:000000:0108 -> 0000:000000:0000
ecm replace 1130:093E:000000:1139 -> 0000:000000:0000
ecm replace 0D5C:093E:000000:0D65 -> 0000:000000:0000
ecm replace 083E:093E:000000:0844 -> 0000:000000:0000
ecm replace 0EE2:093E:000000:00C9 -> 0000:000000:0000
ecm replace 0C6C:093E:000000:0C74 -> 0000:000000:0000
ecm replace 046A:093E:000000:00A6 -> 0000:000000:0000
ecm replace 0D7A:093E:000000:00FC -> 0000:000000:0000
ecm replace 177A:093E:000000:007F -> 0000:000000:0000
ecm replace 177A:093E:000000:00DA -> 0000:000000:0000
ecm replace 0DB6:093E:000000:00D7 -> 0000:000000:0000
ecm replace 05DD:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DAF:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB0:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DAE:093E:000000:00D7 -> 0000:000000:0000
ecm replace 05F1:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB2:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB3:093E:000000:00D7 -> 0000:000000:0000
ecm replace 05EC:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB1:093E:000000:00D7 -> 0000:000000:0000
ecm replace 05F0:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB5:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0DB4:093E:000000:00D7 -> 0000:000000:0000
ecm replace 05DE:093E:000000:00D7 -> 0000:000000:0000
ecm replace 0870:093E:000000:009E -> 0000:000000:0000
ecm replace 0D48:093E:000000:0104 -> 0000:000000:0000
ecm replace 0C1C:093E:000000:0071 -> 0000:000000:0000
ecm replace 13D8:093E:000000:13E1 -> 0000:000000:0000
[config] newcamd route = jurez:85.17.77.3:4014
[config] newcamd route = jurez:85.17.77.3:4000
[config] newcamd route = jurez:85.17.77.3:4001
[config] newcamd route = jurez:85.17.77.3:4002
[config] newcamd route = jurez:85.17.77.3:4003
[config] newcamd route = jurez:85.17.77.3:4004
[config] newcamd route = jurez:85.17.77.3:4005
[config] newcamd route = jurez:85.17.77.3:4006
[config] newcamd route = jurez:85.17.77.3:4007
[config] newcamd route = jurez:85.17.77.3:4008
[config] newcamd route = jurez:85.17.77.3:4009
[config] newcamd route = jurez:85.17.77.3:4010
[config] newcamd route = jurez:85.17.77.3:4011
[config] newcamd route = jurez:85.17.77.3:4012
[config] newcamd route = jurez:85.17.77.3:4013
[config] newcamd route = jurez:85.17.77.3:4015
[config] newcamd route = jurez:85.17.77.3:4016
[config] newcamd route = jurez:85.17.77.3:4017
[config] newcamd route = jurez:85.17.77.3:4018
[config] newcamd route = jurez:85.17.77.3:4019
[config] newcamd route = jurez:85.17.77.3:4020
[config] newcamd route = jurez:85.17.77.3:4021
[config] newcamd route = jurez:85.17.77.3:4022
[config] newcamd route = jurez:85.17.77.3:4023
[config] newcamd route = jurez:85.17.77.3:4024
[config] newcamd route = jurez:85.17.77.3:4025
[config] newcamd route = jurez:85.17.77.3:4026
[config] newcamd route = jurez:85.17.77.3:4027
[config] newcamd route = jurez:85.17.77.3:4028
[config] newcamd route = jurez:85.17.77.3:4029
[config] newcamd route = jurez:85.17.77.3:4500
[config] newcamd route = jurez:85.17.77.3:5000
[config] newcamd route = jurez:85.17.77.3:5001
[config] newcamd route = jurez:85.17.77.3:3999
newcamd keep alive: 120, incoming port: 12000
[mgcam] emm thread started
[newcamd] Connecting to 85.17.77.3:4014...
[newcamd] Connecting to 85.17.77.3:4000...
[newcamd] Connecting to 85.17.77.3:4001...
[newcamd] Connecting to 85.17.77.3:4002...
[newcamd] Connecting to 85.17.77.3:4003...
[newcamd] Connecting to 85.17.77.3:4004...
[newcamd] Connecting to 85.17.77.3:4005...
[newcamd] Connecting to 85.17.77.3:4006...
[newcamd] Connecting to 85.17.77.3:4007...
[newcamd] Connecting to 85.17.77.3:4008...
[newcamd] Connecting to 85.17.77.3:4009...
[newcamd] Connecting to 85.17.77.3:4010...
[newcamd] Connecting to 85.17.77.3:4011...
[newcamd] Connecting to 85.17.77.3:4012...
[newcamd] Connecting to 85.17.77.3:4013...
[newcamd] Connecting to 85.17.77.3:4015...
[newcamd] Connecting to 85.17.77.3:4016...
[newcamd] Connecting to 85.17.77.3:4017...
[newcamd] Connecting to 85.17.77.3:4018...
[newcamd] Connecting to 85.17.77.3:4019...
[newcamd] Connecting to 85.17.77.3:4020...
[newcamd] Connecting to 85.17.77.3:4021...
[newcamd] Connecting to 85.17.77.3:4022...
[newcamd] Connecting to 85.17.77.3:4023...
[newcamd] Connecting to 85.17.77.3:4024...
[newcamd] Connecting to 85.17.77.3:4025...
[newcamd] Connecting to 85.17.77.3:4026...
[newcamd] Connecting to 85.17.77.3:4027...
[newcamd] Connecting to 85.17.77.3:4028...
[newcamd] Connecting to 85.17.77.3:4029...
[newcamd] Connecting to 85.17.77.3:4500...
[newcamd] Connecting to 85.17.77.3:5000...
[newcamd] Connecting to 85.17.77.3:5001...
[newcamd] Connecting to 85.17.77.3:3999...
[newcamd] Login to 85.17.77.3:4001 as jurez failed (53ms)
[newcamd] Login to 85.17.77.3:4014 as jurez failed (56ms)
[newcamd] Login to 85.17.77.3:4000 as jurez failed (59ms)
[newcamd] Login to 85.17.77.3:4002 as jurez failed (62ms)
[newcamd] Login to 85.17.77.3:4003 as jurez failed (66ms)
[newcamd] Login to 85.17.77.3:4005 as jurez failed (68ms)
[newcamd] Login to 85.17.77.3:4004 as jurez failed (71ms)
[newcamd] Login to 85.17.77.3:4006 as jurez failed (73ms)
[newcamd] Login to 85.17.77.3:4007 as jurez failed (84ms)
[newcamd] Login to 85.17.77.3:4008 as jurez failed (88ms)
[newcamd] Login to 85.17.77.3:4009 as jurez failed (69ms)
[newcamd] Login to 85.17.77.3:4010 as jurez failed (78ms)
[newcamd] Login to 85.17.77.3:4011 as jurez failed (82ms)
[newcamd] Login to 85.17.77.3:4012 as jurez failed (85ms)
[newcamd] Login to 85.17.77.3:4013 as jurez failed (88ms)
[newcamd] Login to 85.17.77.3:4015 as jurez failed (90ms)
[newcamd] Login to 85.17.77.3:4016 as jurez failed (93ms)
[newcamd] Login to 85.17.77.3:4017 as jurez failed (97ms)
[newcamd] Login to 85.17.77.3:4018 as jurez failed (99ms)
[newcamd] Login to 85.17.77.3:4019 as jurez failed (102ms)
[newcamd] Login to 85.17.77.3:4020 as jurez failed (105ms)
[newcamd] Login to 85.17.77.3:4021 as jurez failed (108ms)
[newcamd] Login to 85.17.77.3:4022 as jurez failed (199ms)
[newcamd] Login to 85.17.77.3:4023 as jurez failed (201ms)
[newcamd] Login to 85.17.77.3:4024 as jurez failed (203ms)
[newcamd] Login to 85.17.77.3:4025 as jurez failed (206ms)
[newcamd] Login to 85.17.77.3:4026 as jurez failed (207ms)
[newcamd] Login to 85.17.77.3:4027 as jurez failed (211ms)
[newcamd] Login to 85.17.77.3:4028 as jurez failed (213ms)
[newcamd] Login to 85.17.77.3:4029 as jurez failed (215ms)
[newcamd] Login to 85.17.77.3:4500 as jurez failed (217ms)
[newcamd] Login to 85.17.77.3:5000 as jurez failed (220ms)
[newcamd] Login to 85.17.77.3:5001 as jurez failed (223ms)
[newcamd] Login to 85.17.77.3:3999 as jurez failed (224ms)
got 107 cmd 9F
[mg0] namespace C00000 t-id 2 on-id 85
[mg0] descramble on 1, source 0
[mg0] service 8 index 0 pmt pid 69 (1), pids: video 0x09FF, audio 0x0020 0x0A00 0x0A03
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1718 ProvID: 000000
[mg0] ECM: CaID: 0x1722 -> CaPID: 0x1618 ProvID: 000000
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1818 ProvID: 000000
[mg0] ECM: CaID: 0x1834 -> CaPID: 0x1C18 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x1B18 ProvID: 000000
[mg0] ECM: CaID: 0x09C7 -> CaPID: 0x1D18 ProvID: 000000
[mg0] ECM: CaID: 0x09AF -> CaPID: 0x1F18 ProvID: 000000
[mg0] ECM: CaID: 0x098C -> CaPID: 0x1A18 ProvID: 000000
[mg0] ECM: CaID: 0x1861 -> CaPID: 0x1918 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x1718 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1618 failed to decode.
[mg0] No nagra2 key(s) found for id F031 keynr 01
[mg0] network can't decode
[mg0] pid 0x1818 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C18 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1B18 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1D18 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1F18 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1A18 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1918 failed to decode.

[jurez26]

это лог?

[jurez26]

спасибо работает!
а в чём была проблема?

[jack]

рано сели на сервер. после покупки надо ждать 10 мин потом подключаться

[Gurman2000]

Сообщение от telez

Всё верно DreamBoxEdit точно так же.

Всё вроде проще. Выбираешь мультиселектом нужные каналы, потом правый клик и выбираешь Change type to TV.

[telez]

Всё верно спасибо,с этим разобрался, теперь жду прямой трансляции.

[telez]

Сообщение от jurez26

спасибо работает!
а в чём была проблема?

Что бы на все 100% быть уверенным,лучше перед покупкой откл.ресивер от интернета,купить,подаждать 15 мин.и только потом пробывать смотреть.

[Gurman2000]

Хмммм... После этих манипуляций начались проблемы с ХД каналами. В итоге - отказался. Неужели никто ничего не заметил???

[alserbel]

Сообщение от Gurman2000

Хмммм... После этих манипуляций начались проблемы с ХД каналами. В итоге - отказался. Неужели никто ничего не заметил???

В смысле??? Поподробней, пожалуйста.

[Gurman2000]

Поподробней - чертовщина какая-то. Меняю типы этих каналов с Data на TV. Потом закидываю их в Дрим. СД каналы показывают нормально, а вот сигналы ХД (на всех спутниках) падают до 20%. Как следствие, перестают показывать (Tune failed). Приходится заново всё сканировать. В первый раз не поверил что от этого, сделал всё по второму. Повторилось.

[alserbel]

И правда чертовщина, как бы связи вообще никакой не должно быть. У меня всё нормально. Может и есть какая то программно-аппаратная зависимость. Электроника - мистическая наука