Настройка ЭМУЛЯТОРА OSCAM - Страница 47

Serg_l · 17.01.2023, 11:24

Fed,
если куплю Vu+ Zero 4k, cможешь настроить дистанционно?
Cпасибо за внимание.

Цитата:

Сообщение от Serg_l

Fed,
если куплю Vu+ Zero 4k, cможешь настроить дистанционно?
Cпасибо за внимание.

Разобрался сам, все работает.

в таких случаях надо писать в личку

mars22 · 21.03.2023, 17:13

was kann ich tun Hd sender laufen sky nicht.

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = root
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8888
httphelplang = en
httpuser = oscam
httppwd =
httprefresh = 5
httpallowed = 127.0.0.1,0.0.0.1-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

2023/03/21 17:03:03 76D182D8 r (emu) Stream key delayer initialized
2023/03/21 17:03:03 76D182D8 r (emu) Stream relay server initialized
2023/03/21 17:03:03 76D182D8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/03/21 17:03:03 7908630F h (webif) webif: decompressed 185436 bytes back into 489488 bytes
2023/03/21 17:03:03 7908630F h (webif) HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP!
2023/03/21 17:03:03 00000000 (emu) INFO: FFDecsa parallel mode = 128
2023/03/21 17:03:03 00000000 (emu) ERROR: cannot bind to stream server socket
2023/03/21 17:03:04 76D182D8 r (reader) emulator [emu] card detected
2023/03/21 17:03:04 2877FB68 c (ecm) root (1843@000000/0000/EF15/89:8E9A7ED16C16715D83D731AD567FEBF8): found (1136 ms) by "hdplusde"
2023/03/21 17:03:05 76D182D8 r (reader) emulator [emu] found card system emu
2023/03/21 17:03:05 76D182D8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/03/21 17:03:05 76D182D8 r (emu) Key file not found in: /etc/tuxbox/config
2023/03/21 17:03:05 76D182D8 r (emu) Reading key file: /var/keys/SoftCam.Key
2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011042 :10000:H DVB-S2-8PSK
2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00012566 :3616 :V
2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011014 :03750:V DVB-S2/8PSK
2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011262 :30000 :H
2023/03/21 17:03:05 76D182D8 r (emu) Total keys in memory: W:16 V:33 N:14 I:6 F:216 G:0 P:36 T:0 A:0
2023/03/21 17:03:06 00000000 s (main) init for all local cards done
2023/03/21 17:03:06 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/03/21 17:03:06 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/03/21 17:03:06 00000000 s (anticasc) anti cascading disabled
2023/03/21 17:03:06 00000000 s (gbox) local gbox failed init
2023/03/21 17:03:06 5295E0E1 c (client) plain dvbapi-client granted (root, au=off)
2023/03/21 17:03:06 5295E0E1 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/03/21 17:03:06 5295E0E1 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16

**Serg66** · 21.03.2023, 18:33

https://forum.rlst.tv/showthread.php?t=8319

stonehand · 07.04.2023, 21:18

Добрый день давно не смотрел помогите почему не показывает
тюнер openbox SX4
>> OSCam << cardserver log switched at Fri Apr 7 20:13:32 2023
-------------------------------------------------------------------------------
2023/04/07 20:13:32 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11522-796 (sh4-streamboard-linux-gnu-stapi5)
2023/04/07 20:13:32 00000000 s debug_level=512
2023/04/07 20:13:32 00000000 s (main) System name = Linux
2023/04/07 20:13:32 00000000 s (main) Host name = pdk7105
2023/04/07 20:13:32 00000000 s (main) Release = 2.6.32.42stlinux_208_stapi_V.4.1-SDK7105_7105-STSDK
2023/04/07 20:13:32 00000000 s (main) Version = #175 PREEMPT Mon Jun 2 15:23:21 KST 2014
2023/04/07 20:13:32 00000000 s (main) Machine = sh4
2023/04/07 20:13:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3223
2023/04/07 20:13:32 00000000 s (emu) OSCam-Emu version 796
2023/04/07 20:13:32 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2023/04/07 20:13:32 00000000 s (main) signal handling initialized
2023/04/07 20:13:32 00000000 s (config) 1 provid's loaded
2023/04/07 20:13:32 00000000 s (config) 2 service-id's loaded in 0 ms
2023/04/07 20:13:32 00000000 s (net) monitor: initialized (fd=7, port=988)
2023/04/07 20:13:32 00000000 s (net) radegast: initialized (fd=8, port=9090)
2023/04/07 20:13:32 00000000 s (reader) "060A00" [newcamd] creating thread for device rlst11.dwbl.tv
2023/04/07 20:13:32 00000000 s (reader) emulator [emu] creating thread for device emulator
2023/04/07 20:13:32 00000000 s (main) waiting for local card init
2023/04/07 20:13:32 626BCCAE p (newcamd) proxy rlst11.dwbl.tv:3999 newcamd525 (fd=0)
2023/04/07 20:13:32 626BCCAE p (reader) "060A00" [newcamd] proxy initialized, server rlst11.dwbl.tv:3999
2023/04/07 20:13:32 4C55EF97 r (emu) Stream key delayer initialized
2023/04/07 20:13:32 4C55EF97 r (emu) Stream relay server initialized
2023/04/07 20:13:32 4C55EF97 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/04/07 20:13:32 00000000 (emu) INFO: FFDecsa parallel mode = 32
2023/04/07 20:13:32 4C55EF97 r (reader) emulator [emu] card detected
2023/04/07 20:13:32 42CAE1AE h (webif) webif: decompressed 180562 bytes back into 445440 bytes
2023/04/07 20:13:32 42CAE1AE h (webif) HTTP Server running. ip=0.0.0.0 port=7070
2023/04/07 20:13:33 4C55EF97 r (reader) emulator [emu] found card system emu
2023/04/07 20:13:33 4C55EF97 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/04/07 20:13:33 4C55EF97 r (emu) Key file not found in: /var/tuxbox/config
2023/04/07 20:13:33 4C55EF97 r (emu) Reading key file: /var/keys/SoftCam.Key
2023/04/07 20:13:33 4C55EF97 r (emu) Total keys in memory: W:12 V:6 N:0 I:0 F:43 G:0 P:104 T:0 A:0
2023/04/07 20:13:34 00000000 s (main) init for all local cards done
2023/04/07 20:13:34 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/04/07 20:13:34 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/04/07 20:13:34 00000000 s (anticasc) anti cascading disabled
2023/04/07 20:13:34 4D354240 c (client) plain dvbapi-client granted (root, au=off)
2023/04/07 20:13:34 4D354240 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI5 skipped
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI4 skipped
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI3 open 0
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI2 skipped
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI1 skipped
2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI0 skipped
2023/04/07 20:13:34 4D354240 c (dvbstapi) liboscam_stapi5 v.v0.05, STPTI ID: 0x0D initialized
2023/04/07 20:13:34 4D354240 c (dvbapi) Detected /dev/stapi/stpti5_ioctl Api: 2, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2023/04/07 20:13:34 4D354240 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Inappropriate ioctl for device
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1007 PROVID: 040610
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 1453 PROVID: 050A00
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 1773 PROVID: 060A00
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 183B PROVID: 060C00
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in caPMT
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 060A00 ECMPID 1773 ANY CHID PMTPID 0000 VPID 00CB
2023/04/07 20:13:35 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0
2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT
2023/04/07 20:13:43 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5
2023/04/07 20:13:43 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:60C512543DF3CCDF1F27FD1482666820): timeout (8002 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD
2023/04/07 20:13:43 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0
2023/04/07 20:13:51 4D354240 c (-) -- Skipped 1 duplicated log lines --
2023/04/07 20:13:51 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5
2023/04/07 20:13:51 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:60C512543DF3CCDF1F27FD1482666820): timeout (8001 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD
2023/04/07 20:13:51 4D354240 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 3 disabled ecmpids!
2023/04/07 20:13:51 4D354240 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 060A00 ECMPID 1773 ANY CHID PMTPID 0000 VPID 00CB
2023/04/07 20:13:52 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5
2023/04/07 20:13:52 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:26D6ABE5AA7D26CF25F36A1A481F4872): timeout (8001 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD
2023/04/07 20:13:52 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0

[reader]
label = "060A00"
protocol = newcamd
key = 0102030405060708091011121314
device = rlst11.dwbl.tv,3999
user = 3920752
password = xxxxxxxx
group = 1
audisabled = 1
ident = 0500:060A00
disablecrccws = 1
dontcorrectcwchecksum = 1

fed · 08.04.2023, 08:09

Цитата:

Сообщение от stonehand

[reader]
label = "060A00"
protocol = newcamd
key = 0102030405060708091011121314
device = rlst11.dwbl.tv,3999
user = 3920752
password = xxxxxxxx
group = 1
audisabled = 1
ident = 0500:060A00
disablecrccws = 1
dontcorrectcwchecksum = 1

Конфиг давно не обновлял

stonehand · 08.04.2023, 19:54

Цитата:

Сообщение от fed

Конфиг давно не обновлял

О чем речь подскажи, все вроде с шапки скачал и установил

vik.. · 08.04.2023, 20:43

в твоём кабинете скачай новый конфиг на оскам
и закинь его в ресивер

stonehand · 09.04.2023, 07:47

Цитата:

Сообщение от vik..

в твоём кабинете скачай новый конфиг на оскам
и закинь его в ресивер

Так прежде чем сюда писать я так и сделал, ничего не зааботало

>> OSCam << cardserver log switched at Sun Apr 9 06:46:44 2023
-------------------------------------------------------------------------------
2023/04/09 06:46:44 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11522-796 (sh4-streamboard-linux-gnu-stapi5)
2023/04/09 06:46:44 00000000 s (main) System name = Linux
2023/04/09 06:46:44 00000000 s (main) Host name = pdk7105
2023/04/09 06:46:44 00000000 s (main) Release = 2.6.32.42stlinux_208_stapi_V.4.1-SDK7105_7105-STSDK
2023/04/09 06:46:44 00000000 s (main) Version = #175 PREEMPT Mon Jun 2 15:23:21 KST 2014
2023/04/09 06:46:44 00000000 s (main) Machine = sh4
2023/04/09 06:46:44 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1566
2023/04/09 06:46:44 00000000 s (emu) OSCam-Emu version 796
2023/04/09 06:46:44 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2023/04/09 06:46:44 00000000 s (main) signal handling initialized
2023/04/09 06:46:44 00000000 s (config) 1 provid's loaded
2023/04/09 06:46:44 00000000 s (config) 9 service-id's loaded in 2 ms
2023/04/09 06:46:44 00000000 s (net) radegast: initialized (fd=7, port=9090)
2023/04/09 06:46:44 00000000 s (reader) ntv [newcamd] creating thread for device rlst8.dwbl.tv
2023/04/09 06:46:44 00000000 s (reader) emulator [emu] creating thread for device emulator
2023/04/09 06:46:44 00000000 s (main) waiting for local card init
2023/04/09 06:46:44 57E2AD57 p (newcamd) proxy rlst8.dwbl.tv:3999 newcamd525 (fd=0)
2023/04/09 06:46:44 57E2AD57 p (reader) ntv [newcamd] proxy initialized, server rlst8.dwbl.tv:3999
2023/04/09 06:46:44 5D858FEB r (emu) Stream key delayer initialized
2023/04/09 06:46:44 5D858FEB r (emu) Stream relay server initialized
2023/04/09 06:46:44 5D858FEB r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/04/09 06:46:44 00000000 (emu) INFO: FFDecsa parallel mode = 32
2023/04/09 06:46:44 4A2822BF h (webif) webif: decompressed 180562 bytes back into 445440 bytes
2023/04/09 06:46:44 4A2822BF h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2023/04/09 06:46:45 5D858FEB r (reader) emulator [emu] card detected
2023/04/09 06:46:46 5D858FEB r (reader) emulator [emu] found card system emu
2023/04/09 06:46:46 5D858FEB r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/04/09 06:46:46 5D858FEB r (emu) Reading key file: /var/keys/SoftCam.Key
2023/04/09 06:46:46 5D858FEB r (emu) Total keys in memory: W:12 V:6 N:0 I:0 F:43 G:0 P:104 T:0 A:0
2023/04/09 06:46:47 00000000 s (main) init for all local cards done
2023/04/09 06:46:47 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/04/09 06:46:47 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/04/09 06:46:47 00000000 s (anticasc) anti cascading disabled
2023/04/09 06:46:47 6CBC117B c (client) plain dvbapi-client granted (root, au=off)
2023/04/09 06:46:47 6CBC117B c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI5 skipped
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI4 skipped
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI3 open 0
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI2 skipped
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI1 skipped
2023/04/09 06:46:47 6CBC117B c (dvbstapi) PTI: PTI0 skipped
2023/04/09 06:46:47 6CBC117B c (dvbstapi) liboscam_stapi5 v.v0.05, STPTI ID: 0x0D initialized
2023/04/09 06:46:47 6CBC117B c (dvbapi) Detected /dev/stapi/stpti5_ioctl Api: 2, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/04/09 06:46:47 6CBC117B c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Inappropriate ioctl for device
2023/04/09 06:46:47 6CBC117B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1011 PROVID: 040610

**shara** · 09.04.2023, 08:01

Цитата:

Сообщение от stonehand

Так прежде чем сюда писать я так и сделал, ничего не зааботало

https://forum.rlst.tv/showpost.php?p=258218&postcount=1

ну и самое https://forum.rlst.tv/showpost.php?p...&postcount=829

fed · 09.04.2023, 08:58

Цитата:

Сообщение от stonehand

[reader]
label = "060A00"
protocol = newcamd
key = 0102030405060708091011121314
device = rlst11.dwbl.tv,3999
user = 3920752
password = xxxxxxxx
group = 1
audisabled = 1
ident = 0500:060A00
disablecrccws = 1
dontcorrectcwchecksum = 1

[reader]
label = "060A00"
protocol = newcamd
key = 0102030405060708091011121314
device = rlst11.dwbl.tv,3999
user = 3920752
password = xxxxxxxx
group = 1
audisabled = 1
ident = 0500:060A00
disablecrccws = 1

разницу видим?

**Serg66** · 09.04.2023, 10:13

вопрос, зачем вам оскам?
у вас пакет нтв+, установите викард по этой инструкции https://forum.rlst.tv/showthread.php?t=7423 и смотрите без проблем
чтобы увидить конфиг викарда, в профиле уберите выбор ресивера

St0nE · 24.06.2023, 16:42

Доброго всем!
Обновил свой Vu Uno4K SE до OpenBH 5.3, поставил CI+ Helper, сейчас пытаюсь настроить Oscam для работы НТВ+ и Триколора с офф.картой.
Изображение появилось, но такое впечатление, что на НТВ oscam пытается брать ключи с карты. И каналы НТВ открываются нестабильно. Причем видно по логу, что ключи на НТВ получает, но ничего не показывает периодически и на экране выдается ошибка, что не может прочитать с модуля доступа "нет доступа".
Посмотрите пожалуйста конфиги на ошибки, где я чего накосячил?
Спасибо!

Код:

[global]
WaitForCards  = 1
logfile = /tmp/oscam.log
clienttimeout = 8000
nice = -1
maxlogsize = 100

[monitor]
port = 0
nocrypt = 
aulow = 30
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam

[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = root
pmt_mode = 0
request_mode = 0
#force_emm = 0

[webif]
httpport = 8888
httphelplang = en
httpuser = oscam
httppwd = 
httprefresh = 5
httpallowed = 127.0.0.1,0.0.0.1-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Код:

[reader]
label = ntv
protocol = newcamd
key = 0102030405060708091011121314
device = rlst5.dwbl.tv,3999
user = *
password = *
group = 1
audisabled = 1
ident = 0500:060A00
disablecrccws = 1

[reader]
Label = tk
Protocol = internal
Device = /dev/sci0
#setdrecaid = 4ae1
#detect = CD
Group = 1
CAID = 4ae1
EMMCache = 1,3,2
ecmcache = 1

Код:

[account]
user = root
pwd = dreambox
ident = 0500:060A00
group = 1
au = 1

[account]
user = root
pwd = dreambox
Group  = 1
au = tk
ident = 4AE1:000000

[account]
user = icam
keepalive = 1
group = 1

Код:

################
P: 0500:060A00 # NTV+36E
P: 0500:050C00 # NTV+56E
P: 0500:060300 # RTVi
P: 0500:041200 # Doshd
P: 0500:051E00 # XXX
P: 0500:050F00 # XXX
P: 0500:050800 # SRG_SSR
P: 0963:000000 # Sky_UK
P: 098E:000000 # Kabel
P: 0D98:000000 # ORF
P: 0D98:000004 # ORF
P: 0D98:000008 # ORF
P: 0D98:000010 # ORF
P: 0D98:00000C # ORF
P: 1843:000000 # HD+
P: 098D:000000 # Sky_De
P: 1802:000000 #Zon_TV/Digi_TV
P: 1810:000000 #Movistar
P: 1813:000068 #NC+
P: 1834:000000 #Kabel
P: 09C7:000000 #Kabel
P: 1838:000000 #Unitymedia
P: 1838:000401 #Unitymedia
P: 1838:001103 #Unitymedia
P: 183D:000000 #Tivusat
P: 1861:000000 #Polsat
P: 0B02:000000 #Focus
P: 0629:000000 #PINK
P: 0100:00006A #
P: 4AEE:000000 #Bulsatcom
P: 0624:000000 #Skylink
P: 0D96:000000 #Skylink
P: 0D96:000004 #Skylink
P: 0D96:000008 #Skylink
P: 0D96:00000C #Skylink
P: 0D96:000010 #Skylink
P: 0D96:000048 #Skylink
P: 0D97:000004 #UPC_Direct
P: 090D:000000 #Yes_Израиль

#Kontinent
P:0602:000006
P:0602:000032
P:0602:000071
P:0602:00001A
P:0602:0000A1
P:0602:0000BD
P:0602:00009A
P:0602:00009B
P:0602:00FFFF
P:0602:000011
P:0602:000027
P:0602:00002F
P:0602:00008E
P:0602:000091
P:0602:00000B
P:0602:00004C

#Telekarta,THOR
P:0B00:000000

###############
I: 4AEB:000000
I: 0500:023100
I: 0500:025800
I: 0500:040600
I: 0500:040610
I: 0500:060C00
I: 0500:050100
I: 0500:050A00
I: 0500:050B00
I: 5601:000000
I: 0412:000000
I: 09AF:000000
I: 0919:000000
I: 4ABF:000000
I: 0628:00EFD3
I: 0628:00EFD1
I: 0628:00EFD7
I: 0652:000000
I: 4AE1:13
I: 0500:042740
I: 0500:032920
I: 0647:000001
I: 093B:000000 
I: 0500:021700
I: 0100:00A821
I: 1811:000000
I: 0500:022610
I: 0500:032940
I: 0500:032830
I: 0500:043330
I: 0500:042800
I: 0500:040F40
I: 0500:030B00
I: 0628:000000
I: 0647:000000
I: 0604:0000F9
I: 0604:0000D2
I: 0604:0000E8
I: 0D0F:000000
I: 0D70:000000
I: 0666:000000
I: 0D06:000000
I: 0D06:0000C0
I: 0560:000000
I: 0634:000000
I: 0608:000000

Код:

2023/06/24 18:43:59 00000000 s     (main) System name    = Linux
2023/06/24 18:43:59 00000000 s     (main) Host name      = vuuno4kse
2023/06/24 18:43:59 00000000 s     (main) Release        = 4.1.20-1.9
2023/06/24 18:43:59 00000000 s     (main) Version        = #1 SMP Thu May 18 09:22:20 UTC 2023
2023/06/24 18:43:59 00000000 s     (main) Machine        = armv7l
2023/06/24 18:43:59 00000000 s     (main) Stb model      = dm8000
2023/06/24 18:43:59 00000000 s     (main) Stb vumodel    = vuuno4kse
2023/06/24 18:43:59 00000000 s     (main) Stb boxtype    = vuuno4kse
2023/06/24 18:43:59 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 20550
2023/06/24 18:43:59 00000000 s   (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2023/06/24 18:43:59 00000000 s     (main) signal handling initialized
2023/06/24 18:43:59 00000000 s      (led) LED support is not active. Can't detect machine type.
2023/06/24 18:43:59 00000000 s   (reader) ntv [newcamd] creating thread for device rlst5.dwbl.tv
2023/06/24 18:43:59 00000000 s   (reader) tk [internal] creating thread for device /dev/sci0
2023/06/24 18:43:59 00000000 s     (main) waiting for local card init
2023/06/24 18:43:59 7D1AFC66 r   (reader) tk [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2023/06/24 18:43:59 7D1AFC66 r   (reader) tk [internal] Reader sci internal, detected box type: vuuno4kse
2023/06/24 18:43:59 75EE965B p  (newcamd) proxy rlst5.dwbl.tv:3999 newcamd525 (fd=0)
2023/06/24 18:43:59 75EE965B p   (reader) ntv [newcamd] proxy initialized, server rlst5.dwbl.tv:3999
2023/06/24 18:43:59 46420DC0 h    (webif) webif: decompressed 172525 bytes back into 419072 bytes
2023/06/24 18:43:59 46420DC0 h    (webif) HTTP Server running. ip=:: port=8888
2023/06/24 18:44:00 00000000 s     (main) init for all local cards done
2023/06/24 18:44:00 00000000 s     (gbox) local gbox failed init
2023/06/24 18:44:00 181E3C62 c   (client) plain dvbapi-client granted (root, au=auto (2 reader))
2023/06/24 18:44:00 181E3C62 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-latest/oscam.ccache
2023/06/24 18:44:00 181E3C62 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/06/24 18:44:00 181E3C62 c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2710 ECM_PID: 020C PROVID: 00002C CA DATA: 1000005
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 2710 ECM_PID: 020D PROVID: 000028 CA DATA: 1000005
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 4AE1 ECM_PID: 020E PROVID: 000002 
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 2710 ECM_PID: 020F PROVID: 000019 
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 2710 ECM_PID: 0210 PROVID: 000018 
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 4AE1 ECM_PID: 0211 PROVID: 000011 
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 found 6 ECM pids and 3 STREAM pids in CA PMT
2023/06/24 18:44:03 181E3C62 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/06/24 18:44:07 181E3C62 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/24 18:44:18 181E3C62 c        (-) -- Skipped 2 duplicated log lines --
2023/06/24 18:44:18 181E3C62 c   (dvbapi) Demuxer 0 stopped descrambling for program 4A4F (2710@00002C:4A4F unknown)
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1008 PROVID: 040610 
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 1454 PROVID: 050A00 
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 1774 PROVID: 060A00 
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 183C PROVID: 060C00 
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 found 4 ECM pids and 3 STREAM pids in CA PMT
2023/06/24 18:44:19 181E3C62 c   (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 060A00 ECMPID 1774 ANY CHID PMTPID 0770 VPID 00CC
2023/06/24 18:44:19 75EE965B p   (reader) rlst5.dwbl.tv: resolved ip=37.48.117.224
2023/06/24 18:44:19 75EE965B p   (reader) ntv [newcamd] connecting to rlst5.dwbl.tv:3999
2023/06/24 18:44:19 75EE965B p  (newcamd) Newcamd Server: rlst5.dwbl.tv:3999 - UserID: 58
2023/06/24 18:44:19 75EE965B p  (newcamd) CAID: 0500 - UA: 0000000000000000 - Provider # 1
2023/06/24 18:44:19 75EE965B p  (newcamd) Provider ID: 060A00 - SA: 00000000
2023/06/24 18:44:20 181E3C62 c      (ecm) root (0500@060A00/0B01/4AA0/148:02B2AC1CE444078640997CC2124C4BA2): found (505 ms) by ntv
2023/06/24 18:44:30 181E3C62 c      (ecm) root (0500@060A00/0B01/4AA0/148:5101057C0D80C9BE6740A4027DD28FBD): found (544 ms) by ntv

**Serg66** · 24.06.2023, 21:14

это точно не к нам
возможно на профильный форум по ресиверу, а может на профильный форум по имиджу

St0nE · 24.06.2023, 22:57

только НТВ работает вообще без вопросов, но как добавляю карту, начинается фигня такая.. поэтому и грешу на настройки оскама.

**Serg66** · 25.06.2023, 20:46

в любом случае это не к нам, шара ведь нормально работает

jurasik · 23.07.2023, 11:51

Вопрос может даже тупой и не в той теме, но - подсажите есть тут на форуме место где можно работающий Oscam icam 11719 v9 ipk скачать?

ncbelov · 24.08.2023, 18:38

Здравствуйте!Не знаю в какой теме спросить,спрошу тут поменял ресивер skyway nano3 на OpenBox AS4K CI Pro+,но вот не знаю какой эмуль ставить пишут вроде XCAMClient3,но здесь такого не нашел а в ресивере после санкций "борода" на плагины.если не трудно направьте на путь истинный.

**ches01** · 24.08.2023, 19:18

https://viva-tv.ru/jemuljatory-i-kljuchi-65/
отсюда и как установить и настроить

ncbelov · 24.08.2023, 20:52

Xcamclient3 поставил-толку нет канал закодирован.

**Serg66** · 24.08.2023, 21:23

ncam установите https://skr.sh/fLTOGB7Pytd
на флешку когда распакуете, не забудьте свой пароль внести в нкам.сервер

оскам и икскам вроде как не стабильно работают на этих ресиверах

21.03.2023, 17:13	#922
mars22 абонент Регистрация: 06.04.2015 Сообщения: 57	was kann ich tun Hd sender laufen sky nicht. [dvbapi] enabled = 1 au = 1 boxtype = dreambox user = root pmt_mode = 0 request_mode = 0 [webif] httpport = 8888 httphelplang = en httpuser = oscam httppwd = httprefresh = 5 httpallowed = 127.0.0.1,0.0.0.1-255.255.255.255 httphideidleclients = 0 httpreadonly = 0 httpsavefullcfg = 0 2023/03/21 17:03:03 76D182D8 r (emu) Stream key delayer initialized 2023/03/21 17:03:03 76D182D8 r (emu) Stream relay server initialized 2023/03/21 17:03:03 76D182D8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357) 2023/03/21 17:03:03 7908630F h (webif) webif: decompressed 185436 bytes back into 489488 bytes 2023/03/21 17:03:03 7908630F h (webif) HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP! 2023/03/21 17:03:03 00000000 (emu) INFO: FFDecsa parallel mode = 128 2023/03/21 17:03:03 00000000 (emu) ERROR: cannot bind to stream server socket 2023/03/21 17:03:04 76D182D8 r (reader) emulator [emu] card detected 2023/03/21 17:03:04 2877FB68 c (ecm) root (1843@000000/0000/EF15/89:8E9A7ED16C16715D83D731AD567FEBF8): found (1136 ms) by "hdplusde" 2023/03/21 17:03:05 76D182D8 r (reader) emulator [emu] found card system emu 2023/03/21 17:03:05 76D182D8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 2023/03/21 17:03:05 76D182D8 r (emu) Key file not found in: /etc/tuxbox/config 2023/03/21 17:03:05 76D182D8 r (emu) Reading key file: /var/keys/SoftCam.Key 2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011042 :10000:H DVB-S2-8PSK 2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00012566 :3616 :V 2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011014 :03750:V DVB-S2/8PSK 2023/03/21 17:03:05 76D182D8 r (emu) WARNING: non-hex value in SoftCam.Key at B 00011262 :30000 :H 2023/03/21 17:03:05 76D182D8 r (emu) Total keys in memory: W:16 V:33 N:14 I:6 F:216 G:0 P:36 T:0 A:0 2023/03/21 17:03:06 00000000 s (main) init for all local cards done 2023/03/21 17:03:06 00000000 s (emmcache) loading emmcache disabled since no reader is using it! 2023/03/21 17:03:06 00000000 s (emmcache) loading emmstats disabled since no reader is using it! 2023/03/21 17:03:06 00000000 s (anticasc) anti cascading disabled 2023/03/21 17:03:06 00000000 s (gbox) local gbox failed init 2023/03/21 17:03:06 5295E0E1 c (client) plain dvbapi-client granted (root, au=off) 2023/03/21 17:03:06 5295E0E1 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64) 2023/03/21 17:03:06 5295E0E1 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16 Последний раз редактировалось Serg66, 21.03.2023 в 18:32.

08.04.2023, 20:43	#927
vik.. абонент Регистрация: 11.04.2009 Сообщения: 354	в твоём кабинете скачай новый конфиг на оскам и закинь его в ресивер __________________ Dreambox 920

24.08.2023, 19:18	#938
ches01 Super Moderator Регистрация: 06.07.2005 Сообщения: 6,358	https://viva-tv.ru/jemuljatory-i-kljuchi-65/ отсюда и как установить и настроить __________________ Прямое пополнение через ЮМ, СБП, с карт BY и КZ! Контакты https://telegra.ph/Kontakty-07-02-3 ---------------------------------------------------

24.08.2023, 21:23	#940
Serg66 Super Moderator Регистрация: 28.09.2008 Сообщения: 2,622	ncam установите https://skr.sh/fLTOGB7Pytd на флешку когда распакуете, не забудьте свой пароль внести в нкам.сервер оскам и икскам вроде как не стабильно работают на этих ресиверах Последний раз редактировалось Serg66, 24.08.2023 в 21:26.

Опции темы
Версия для печати Отправить на email
Опции просмотра
Линейный вид Комбинированный вид Древовидный вид

21.03.2023, 18:33	#923
Serg66 Super Moderator Регистрация: 28.09.2008 Сообщения: 2,622	https://forum.rlst.tv/showthread.php?t=8319

07.04.2023, 21:18	#924
stonehand абонент Регистрация: 28.09.2013 Сообщения: 8	Добрый день давно не смотрел помогите почему не показывает тюнер openbox SX4 >> OSCam << cardserver log switched at Fri Apr 7 20:13:32 2023 ------------------------------------------------------------------------------- 2023/04/07 20:13:32 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11522-796 (sh4-streamboard-linux-gnu-stapi5) 2023/04/07 20:13:32 00000000 s debug_level=512 2023/04/07 20:13:32 00000000 s (main) System name = Linux 2023/04/07 20:13:32 00000000 s (main) Host name = pdk7105 2023/04/07 20:13:32 00000000 s (main) Release = 2.6.32.42stlinux_208_stapi_V.4.1-SDK7105_7105-STSDK 2023/04/07 20:13:32 00000000 s (main) Version = #175 PREEMPT Mon Jun 2 15:23:21 KST 2014 2023/04/07 20:13:32 00000000 s (main) Machine = sh4 2023/04/07 20:13:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3223 2023/04/07 20:13:32 00000000 s (emu) OSCam-Emu version 796 2023/04/07 20:13:32 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled 2023/04/07 20:13:32 00000000 s (main) signal handling initialized 2023/04/07 20:13:32 00000000 s (config) 1 provid's loaded 2023/04/07 20:13:32 00000000 s (config) 2 service-id's loaded in 0 ms 2023/04/07 20:13:32 00000000 s (net) monitor: initialized (fd=7, port=988) 2023/04/07 20:13:32 00000000 s (net) radegast: initialized (fd=8, port=9090) 2023/04/07 20:13:32 00000000 s (reader) "060A00" [newcamd] creating thread for device rlst11.dwbl.tv 2023/04/07 20:13:32 00000000 s (reader) emulator [emu] creating thread for device emulator 2023/04/07 20:13:32 00000000 s (main) waiting for local card init 2023/04/07 20:13:32 626BCCAE p (newcamd) proxy rlst11.dwbl.tv:3999 newcamd525 (fd=0) 2023/04/07 20:13:32 626BCCAE p (reader) "060A00" [newcamd] proxy initialized, server rlst11.dwbl.tv:3999 2023/04/07 20:13:32 4C55EF97 r (emu) Stream key delayer initialized 2023/04/07 20:13:32 4C55EF97 r (emu) Stream relay server initialized 2023/04/07 20:13:32 4C55EF97 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357) 2023/04/07 20:13:32 00000000 (emu) INFO: FFDecsa parallel mode = 32 2023/04/07 20:13:32 4C55EF97 r (reader) emulator [emu] card detected 2023/04/07 20:13:32 42CAE1AE h (webif) webif: decompressed 180562 bytes back into 445440 bytes 2023/04/07 20:13:32 42CAE1AE h (webif) HTTP Server running. ip=0.0.0.0 port=7070 2023/04/07 20:13:33 4C55EF97 r (reader) emulator [emu] found card system emu 2023/04/07 20:13:33 4C55EF97 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 2023/04/07 20:13:33 4C55EF97 r (emu) Key file not found in: /var/tuxbox/config 2023/04/07 20:13:33 4C55EF97 r (emu) Reading key file: /var/keys/SoftCam.Key 2023/04/07 20:13:33 4C55EF97 r (emu) Total keys in memory: W:12 V:6 N:0 I:0 F:43 G:0 P:104 T:0 A:0 2023/04/07 20:13:34 00000000 s (main) init for all local cards done 2023/04/07 20:13:34 00000000 s (emmcache) loading emmcache disabled since no reader is using it! 2023/04/07 20:13:34 00000000 s (emmcache) loading emmstats disabled since no reader is using it! 2023/04/07 20:13:34 00000000 s (anticasc) anti cascading disabled 2023/04/07 20:13:34 4D354240 c (client) plain dvbapi-client granted (root, au=off) 2023/04/07 20:13:34 4D354240 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI5 skipped 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI4 skipped 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI3 open 0 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI2 skipped 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI1 skipped 2023/04/07 20:13:34 4D354240 c (dvbstapi) PTI: PTI0 skipped 2023/04/07 20:13:34 4D354240 c (dvbstapi) liboscam_stapi5 v.v0.05, STPTI ID: 0x0D initialized 2023/04/07 20:13:34 4D354240 c (dvbapi) Detected /dev/stapi/stpti5_ioctl Api: 2, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64) 2023/04/07 20:13:34 4D354240 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Inappropriate ioctl for device 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1007 PROVID: 040610 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 1453 PROVID: 050A00 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 1773 PROVID: 060A00 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 183B PROVID: 060C00 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in caPMT 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 060A00 ECMPID 1773 ANY CHID PMTPID 0000 VPID 00CB 2023/04/07 20:13:35 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0 2023/04/07 20:13:35 4D354240 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT 2023/04/07 20:13:43 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5 2023/04/07 20:13:43 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:60C512543DF3CCDF1F27FD1482666820): timeout (8002 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD 2023/04/07 20:13:43 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0 2023/04/07 20:13:51 4D354240 c (-) -- Skipped 1 duplicated log lines -- 2023/04/07 20:13:51 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5 2023/04/07 20:13:51 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:60C512543DF3CCDF1F27FD1482666820): timeout (8001 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD 2023/04/07 20:13:51 4D354240 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 3 disabled ecmpids! 2023/04/07 20:13:51 4D354240 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 060A00 ECMPID 1773 ANY CHID PMTPID 0000 VPID 00CB 2023/04/07 20:13:52 4D354240 c (ecm) {client root, caid 0500, srvid 057B} [write_ecm_answer] cyclecheck passed! Reader: "060A00" rc: 5 2023/04/07 20:13:52 4D354240 c (ecm) root (0500@060A00/0B01/057B/1A6:26D6ABE5AA7D26CF25F36A1A481F4872): timeout (8001 ms) by "060A00" - РњРђРўР§ РџРР•РњР¬Р•Р HD 2023/04/07 20:13:52 4D354240 c (ecm) [GET_CW] wait_time 0 caid 0500 prov 060A00 srvid 057B rc 100 cacheex cl mode 0 ex1rdr 0 [reader] label = "060A00" protocol = newcamd key = 0102030405060708091011121314 device = rlst11.dwbl.tv,3999 user = 3920752 password = xxxxxxxx group = 1 audisabled = 1 ident = 0500:060A00 disablecrccws = 1 dontcorrectcwchecksum = 1

09.04.2023, 10:13	#931
Serg66 Super Moderator Регистрация: 28.09.2008 Сообщения: 2,622	вопрос, зачем вам оскам? у вас пакет нтв+, установите викард по этой инструкции https://forum.rlst.tv/showthread.php?t=7423 и смотрите без проблем чтобы увидить конфиг викарда, в профиле уберите выбор ресивера

24.06.2023, 21:14	#933
Serg66 Super Moderator Регистрация: 28.09.2008 Сообщения: 2,622	это точно не к нам возможно на профильный форум по ресиверу, а может на профильный форум по имиджу

24.06.2023, 22:57	#934
St0nE абонент Регистрация: 13.09.2008 Сообщения: 11	только НТВ работает вообще без вопросов, но как добавляю карту, начинается фигня такая.. поэтому и грешу на настройки оскама.

25.06.2023, 20:46	#935
Serg66 Super Moderator Регистрация: 28.09.2008 Сообщения: 2,622	в любом случае это не к нам, шара ведь нормально работает

23.07.2023, 11:51	#936
jurasik абонент Регистрация: 19.12.2010 Сообщения: 135	Вопрос может даже тупой и не в той теме, но - подсажите есть тут на форуме место где можно работающий Oscam icam 11719 v9 ipk скачать?

24.08.2023, 18:38	#937
ncbelov Пользователь Регистрация: 27.06.2013 Сообщения: 6	Здравствуйте!Не знаю в какой теме спросить,спрошу тут поменял ресивер skyway nano3 на OpenBox AS4K CI Pro+,но вот не знаю какой эмуль ставить пишут вроде XCAMClient3,но здесь такого не нашел а в ресивере после санкций "борода" на плагины.если не трудно направьте на путь истинный.

24.08.2023, 20:52	#939
ncbelov Пользователь Регистрация: 27.06.2013 Сообщения: 6	Xcamclient3 поставил-толку нет канал закодирован.

Здесь присутствуют: 4 (пользователей - 0 , гостей - 4)