![]() |
![]() |
#581 |
абонент
Регистрация: 06.03.2007
Сообщения: 10,631
|
![]() И хде ж мы плагин такой под мипс ресиверы то для sh4 взяли?Просишь 8120 Gis настроить помочь,а у самого в логе Aug 11 16:15:00 192.168.1.69 Box type: mips dreambox (dm7025, dm800)
Последний раз редактировалось fed, 11.08.2014 в 14:14. |
![]() |
![]() |
![]() |
#582 | |
Пользователь
Регистрация: 24.01.2008
Сообщения: 678
|
![]() Цитата:
|
|
![]() |
![]() |
![]() |
#583 |
Пользователь
Регистрация: 07.03.2010
Сообщения: 1,195
|
![]() Эмулятор откуда брали?
__________________
GLOBO-9500HD, VU+ SOLO2, GI-S8120 T90:4W-0,8W-3E-4,8E-7E-9E&10E-13E-15,8E-19,2E-21,6Е-23,5E-28,2E-31,5E-33E-36E-39E-42E-45E GI100:55E&56E-60E-66E-68,5Е-75E-80E GI80:47.5E-53E-57E&58.5E GI80:85E-90E группа: 4 |
![]() |
![]() |
![]() |
#584 |
абонент
Регистрация: 06.03.2007
Сообщения: 10,631
|
![]() Этот дешевый рес надо суметь не настроить.Там настолько все просто с флешки ставится,стартуется с пульта и пашет,что...
|
![]() |
![]() |
![]() |
#585 | |
Пользователь
Регистрация: 24.01.2008
Сообщения: 678
|
![]() Цитата:
|
|
![]() |
![]() |
![]() |
#586 |
Пользователь
Регистрация: 07.03.2010
Сообщения: 1,195
|
![]() Гисклуб большой. На спарке, на энигме рес? Conax отключен?
__________________
GLOBO-9500HD, VU+ SOLO2, GI-S8120 T90:4W-0,8W-3E-4,8E-7E-9E&10E-13E-15,8E-19,2E-21,6Е-23,5E-28,2E-31,5E-33E-36E-39E-42E-45E GI100:55E&56E-60E-66E-68,5Е-75E-80E GI80:47.5E-53E-57E&58.5E GI80:85E-90E группа: 4 |
![]() |
![]() |
![]() |
#587 | |
Пользователь
Регистрация: 24.01.2008
Сообщения: 678
|
![]() Цитата:
ваще рес работал на спарке года три мдкамд стоял всё казало.недавно выключали свет несколько раз ресс перестал включатся на табло горела натпись null,пришлось перепрошить ремонтной прошивкой а потом последней.отсканировать заново спутники и каналы и поставить мжкамд который не могу завести досих пор поэтому прошу помощи |
|
![]() |
![]() |
![]() |
#588 |
Пользователь
Регистрация: 07.03.2010
Сообщения: 1,195
|
![]() Для спарка В 11, проверь ходит ли в инет ресивер, из другого источника эмуль возьми
__________________
GLOBO-9500HD, VU+ SOLO2, GI-S8120 T90:4W-0,8W-3E-4,8E-7E-9E&10E-13E-15,8E-19,2E-21,6Е-23,5E-28,2E-31,5E-33E-36E-39E-42E-45E GI100:55E&56E-60E-66E-68,5Е-75E-80E GI80:47.5E-53E-57E&58.5E GI80:85E-90E группа: 4 |
![]() |
![]() |
![]() |
#589 |
Пользователь
Регистрация: 24.01.2008
Сообщения: 678
|
![]() в11 пробывал.ютьб работает.откуда дайте ссылку на рабочий плагин
|
![]() |
![]() |
![]() |
#590 |
Пользователь
Регистрация: 07.03.2010
Сообщения: 1,195
|
![]()
__________________
GLOBO-9500HD, VU+ SOLO2, GI-S8120 T90:4W-0,8W-3E-4,8E-7E-9E&10E-13E-15,8E-19,2E-21,6Е-23,5E-28,2E-31,5E-33E-36E-39E-42E-45E GI100:55E&56E-60E-66E-68,5Е-75E-80E GI80:47.5E-53E-57E&58.5E GI80:85E-90E группа: 4 |
![]() |
![]() |
![]() |
#591 | |
абонент
Регистрация: 27.03.2009
Сообщения: 125
|
![]() Цитата:
|
|
![]() |
![]() |
![]() |
#592 | |
Пользователь
Регистрация: 07.03.2010
Сообщения: 1,195
|
![]() Цитата:
__________________
GLOBO-9500HD, VU+ SOLO2, GI-S8120 T90:4W-0,8W-3E-4,8E-7E-9E&10E-13E-15,8E-19,2E-21,6Е-23,5E-28,2E-31,5E-33E-36E-39E-42E-45E GI100:55E&56E-60E-66E-68,5Е-75E-80E GI80:47.5E-53E-57E&58.5E GI80:85E-90E группа: 4 |
|
![]() |
![]() |
![]() |
#593 |
абонент
Регистрация: 31.08.2009
Сообщения: 35
|
![]() Здравствуйте, не работает половина виасата
вот лог Aug 12 19:14:02 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:06 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3335ms) Aug 12 19:14:06 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:11 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:11 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (95ms) Aug 12 19:14:12 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:17 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:21 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (4343ms) Aug 12 19:14:21 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:25 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:30 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:31 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (1107ms) Aug 12 19:14:32 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:36 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3353ms) Aug 12 19:14:37 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:41 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:45 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:50 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:51 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (1281ms) Aug 12 19:14:52 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:14:55 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3187ms) Aug 12 19:14:57 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:15:01 192.168.1.10 ECM to newcamd 83.166.48.44:4000 Aug 12 19:15:01 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (102ms)
__________________
vu uno 4k |
![]() |
![]() |
![]() |
#594 |
абонент
Регистрация: 31.08.2009
Сообщения: 35
|
![]() ресивер ги 8895, подписка плюс 36 хд
заранее спасибо
__________________
vu uno 4k |
![]() |
![]() |
![]() |
#595 |
абонент
Регистрация: 01.01.2009
Сообщения: 38
|
![]() народ,помогите..
парюсь уже какой день не показывает и все.... # EMM messages # 00 don't show any EMMs (default) # 01 show only valid EMMs # 02 show valid and bad EMMs with complete data display M: { 00 } # ECM messages # 00 don't show anything about ecm # 01 normal mode, show pids processed, decoded ecm and cw # 02 verbose mode, show valid and bad ECMs with data C: { 00 } # AU # 00 disable, no emm pids processed # 01 enable, emm pids always processed for soft-au and shared cards # 02 auto, emm started only if channel cant be decoded # 03 process emm pids for network cards update only A: { 02 } # key update (sum 01 or 02 with 04) # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) # 04 enable TPS au # + tps SID, which pmt pid contains au pid U: { 01 } 0x12c0 # config files folder (softcam, autoroll, ignore/priority) # 00 files in /var/keys # 01 files in /tmp T: { 00 } # network mode, use summ for several clients # 00 no network (default) # 01 newcamd netclient # 02 radegast netclient # 04 camd3 netclient # 08 gbox netclient # 32 cccamd netclient, card list saved as /tmp/cccamd.info # (ECM only, supported server version up to 2.1.1, later not work) G: { 00 } # network retry, use summ for several options # 00 disable # 01 retry every new ecm # 02 try to connect to offline shares every Q: seconds # 04 try to detect and fast reconnect to lost (and not used atm) server # + XX messages number and YY seconds to reconnect # mg will reconnect to server, if no answer to last XX ecm/keepalive or # if no answer for last ecm or keepalive sent for YY seconds # set to 0 to disable N: { 01 } 530 #N: { 02 } # network ecm timeout in seconds K: { 05 } # newcamd dead routes connect retry, sec Q: { 10 } # network shares priority # 00 gbox, newcamd, cccamd, radegast, camd3 (default) # 01 camd3, radegast, cccamd, gbox, newcamd # 02 cccamd, newcamd, camd3, gbox, radegast P: { 02 } # on screen display type # 00 No OSD (default) # 01 neutrino # 02 enigma # 03 relook # + user password for http auth O: { 00 } username password # on screen display Options, summ of: # 01 show emu ecm # 02 show network shares messages # 04 show decoding failed / fta # 08 show emm keys update # + web port to use for osd S: { 03 } 80 # Log option, summ of: # 00 off # 01 network udp log # 02 log to console # 04 file, appended ! delete it by yourself, before it eat all your hdd # + IP udp-port log-file-name #L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log #L: { 02 } 192.168.178.26 514 L: { 01 }192.168.178.26 514 # keep ecm cache, seconds # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, # for openbox/elanvision users with remote shares make sense to set it higher than default value, # to not hammer cards while timeshifting or playing crypted recordings. E: { 15 } # cache option, summ of: # 00 Off (default) # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list # 02 Ecm data cache, remember CW for (E ![]() # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart #H: { 07 } H: { 00 } # reread files, summ of: # 00 No (default) # 01 reread config file on channel change (including priority and ignore, but not replace/cache) # 02 reread SoftCam.Key on channel change # 04 reread SoftCam.Key if file changed R: { 04 } # debug, summ of # 00 off (default) # 01 debug ecm # 02 debug emm # 04 debug network ecm # 08 debug network emm # 16 debug network login # 32 show mem/cpu stats every 1 min # 64 add timestamp to log messages D: { 00 } # box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox # 06 dreambox/mips # 08 stapi/kathrein # 09 stapi/ipbox # 11 stapi/openbox B: { 01 } # map all 180x nagra caids to 1801 # default is 01 F: { 01 } CWS = rlst15.dwbl.tv 4008 xxxxxx xxxx01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv #CWS = rlst15.dwbl.tv 4500 xxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv CWS = rlst15.dwbl.tv 4032 xxxxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv CWS_CONNECT_TIMEOUT = 120 CWS_KEEPALIVE = yes log Aug 17 19:30:30 192.168.178.46 [mg0] stoping camd.. Aug 17 19:30:30 192.168.178.46 [mgcamd] emm stopped Aug 17 19:30:32 192.168.178.46 [mgcamd] signal 15 received Aug 17 19:31:32 192.168.178.46 [mg] Net:0:1:2:5s Show ecm:0, emm:0 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:0 Log:1:192.168.178.26:514 Reread:4 Aug 17 19:31:32 192.168.178.46 [mg] Ecm cache time: 15 Aug 17 19:31:32 192.168.178.46 Box type: dbox2 Aug 17 19:31:32 192.168.178.46 Keys readed Aug 17 19:31:33 192.168.178.46 [mgcam] emm thread started Aug 17 19:32:00 192.168.178.46 got 58 cmd 9F Aug 17 19:32:00 192.168.178.46 Aug 17 19:32:00 192.168.178.46 [mg0] service B index 0 pmt pid 0 (1), pids: video 0x06FF, audio 0x0700 0x0703 Aug 17 19:32:00 192.168.178.46 CaPID: 0x1744 ProvID: 000000 Aug 17 19:32:00 192.168.178.46 CaPID: 0x1844 ProvID: 000000 Aug 17 19:32:00 192.168.178.46 CaPID: 0x1B44 ProvID: 000000 Aug 17 19:32:00 192.168.178.46 CaPID: 0x1F44 ProvID: 000000 Aug 17 19:32:00 192.168.178.46 CaPID: 0x1A44 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 [mgcamd] emm started Aug 17 19:32:01 192.168.178.46 CaPID: 0x1000 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1502 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1009 ProvID: 000000 Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000 Aug 17 19:33:19 192.168.178.46 Aug 17 19:33:19 192.168.178.46 Aug 17 19:33:24 192.168.178.46 Aug 17 19:33:24 192.168.178.46 Aug 17 19:38:01 192.168.178.46 Aug 17 19:38:01 192.168.178.46 Aug 17 19:38:20 192.168.178.46 Aug 17 19:38:20 192.168.178.46 Последний раз редактировалось capuchino, 17.08.2014 в 19:35. |
![]() |
![]() |
![]() |
#596 |
абонент
Регистрация: 05.02.2009
Сообщения: 4,838
|
![]() #CWS не првильно,убрать #
ресивер какой? B: { 06 } F: { 00 } |
![]() |
![]() |
![]() |
#597 |
абонент
Регистрация: 01.01.2009
Сообщения: 38
|
![]() dbox2 GLJ
|
![]() |
![]() |
![]() |
#598 |
абонент
Регистрация: 05.02.2009
Сообщения: 4,838
|
![]() Рес,не знаком может так
B: { 00 } F: { 00 } CWS = rlst15.dwbl.tv 4008 xxxxxx xxxx01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv CWS = rlst15.dwbl.tv 4500 xxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv |
![]() |
![]() |
![]() |
#599 |
абонент
Регистрация: 01.01.2009
Сообщения: 38
|
![]() не идет ни чего....
log Aug 17 21:38:14 192.168.178.46 [mg0] service 2EE3 index 0 pmt pid 0 (9), pids: video 0x00A3, audio 0x0068 0x006A Aug 17 21:38:14 192.168.178.46 [mg0] No supported encryption system found Aug 17 21:38:14 192.168.178.46 [mg0] stopped Aug 17 21:39:27 192.168.178.46 [mg0] stoping camd.. Aug 17 21:39:27 192.168.178.46 got 63 cmd 9F Aug 17 21:39:27 192.168.178.46 Aug 17 21:39:27 192.168.178.46 Aug 17 21:39:27 192.168.178.46 [mg0] service B index 0 pmt pid 0 (10), pids: video 0x06FF, audio 0x0700 0x0701 0x0703 Aug 17 21:39:27 192.168.178.46 CaPID: 0x1744 ProvID: 000000 Aug 17 21:39:27 192.168.178.46 CaPID: 0x1844 ProvID: 000000 Aug 17 21:39:27 192.168.178.46 CaPID: 0x1B44 ProvID: 000000 Aug 17 21:39:27 192.168.178.46 CaPID: 0x1F44 ProvID: 000000 Aug 17 21:39:27 192.168.178.46 CaPID: 0x1A44 ProvID: 000000 Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1744 failed to decode. Aug 17 21:39:27 192.168.178.46 [mg0] No nagra2 key(s) found for id 33F6 keynr 00 Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1844 failed to decode. Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1B44 failed to decode. Aug 17 21:39:28 192.168.178.46 [mg0] network can't decode Aug 17 21:39:28 192.168.178.46 [mg0] pid 0x1F44 failed to decode. Aug 17 21:39:28 192.168.178.46 [mg0] network can't decode Aug 17 21:39:28 192.168.178.46 [mg0] pid 0x1A44 failed to decode. Aug 17 21:40:08 192.168.178.46 Mgcamd v1.38a @ mixvt, patched by D2MAC on Jul 18 2012 Aug 17 21:40:08 192.168.178.46 [mg] Net:1:1:0:3s Show ecm:1, emm:0 Up:1 Au:0 Dir:0 Osd:neutrino:80:3 Cache:0 Log:1:192.168.178.26:514 Reread:0 Aug 17 21:40:08 192.168.178.46 [mg] Ecm cache time: 7 Aug 17 21:40:08 192.168.178.46 Box type: dbox2 Aug 17 21:40:08 192.168.178.46 Aug 17 21:40:08 192.168.178.46 Keys readed Aug 17 21:40:09 192.168.178.46 [config] newcamd route = capuchino:rlst15.dwbl.tv:4500 server cardserv Aug 17 21:40:09 192.168.178.46 newcamd keep alive: 600, incoming port: 0 Aug 17 21:40:09 192.168.178.46 [mgcam] emm thread started Aug 17 21:40:09 192.168.178.46 [newcamd] Connecting to rlst15.dwbl.tv:4500... Aug 17 21:40:34 192.168.178.46 Mgcamd v1.38a @ mixvt, patched by D2MAC on Jul 18 2012 Aug 17 21:40:34 192.168.178.46 [mg] Net:1:1:0:3s Show ecm:1, emm:0 Up:1 Au:0 Dir:0 Osd:neutrino:80:3 Cache:0 Log:1:192.168.178.26:514 Reread:0 Aug 17 21:40:34 192.168.178.46 [mg] Ecm cache time: 7 Aug 17 21:40:34 192.168.178.46 Box type: dbox2 Aug 17 21:40:34 192.168.178.46 Keys readed Aug 17 21:40:35 192.168.178.46 [config] newcamd route = capuchino:rlst15.dwbl.tv:4500 server cardserv Aug 17 21:40:35 192.168.178.46 newcamd keep alive: 600, incoming port: 0 Aug 17 21:40:35 192.168.178.46 [mgcam] emm thread started Aug 17 21:40:35 192.168.178.46 [newcamd] Connecting to rlst15.dwbl.tv:4500... Aug 17 21:40:35 192.168.178.46 [newcamd] Login to rlst15.dwbl.tv:4500 as capuchino accepted (85ms) Aug 17 21:40:36 192.168.178.46 [newcamd] Card data from rlst15.dwbl.tv:4500 (204ms): Aug 17 21:40:36 192.168.178.46 Userid 2 caid 0 providers 0 Aug 17 21:40:36 192.168.178.46 Aug 17 21:40:39 192.168.178.46 got 63 cmd 9F Aug 17 21:40:39 192.168.178.46 Aug 17 21:40:39 192.168.178.46 Aug 17 21:40:39 192.168.178.46 [mg0] service B index 0 pmt pid 0 (1), pids: video 0x06FF, audio 0x0700 0x0701 0x0703 Aug 17 21:40:39 192.168.178.46 CaPID: 0x1744 ProvID: 000000 Aug 17 21:40:39 192.168.178.46 CaPID: 0x1844 ProvID: 000000 Aug 17 21:40:39 192.168.178.46 CaPID: 0x1B44 ProvID: 000000 Aug 17 21:40:39 192.168.178.46 CaPID: 0x1F44 ProvID: 000000 Aug 17 21:40:39 192.168.178.46 CaPID: 0x1A44 ProvID: 000000 Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1744 failed to decode. Aug 17 21:40:39 192.168.178.46 [mg0] No nagra2 key(s) found for id 244E keynr 01 Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1844 failed to decode. Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1B44 failed to decode. Aug 17 21:40:40 192.168.178.46 [mg0] network can't decode Aug 17 21:40:40 192.168.178.46 [mg0] pid 0x1F44 failed to decode. Aug 17 21:40:40 192.168.178.46 [mg0] network can't decode Aug 17 21:40:40 192.168.178.46 [mg0] pid 0x1A44 failed to decode. Последний раз редактировалось capuchino, 17.08.2014 в 21:30. |
![]() |
![]() |
![]() |
#600 |
абонент
Регистрация: 06.03.2007
Сообщения: 10,631
|
![]() И не пойдет если ресивер видит что канал кодирован незнакомой ему кодировкой или вообще открыт
|
![]() |
![]() |