Wicard настройка

[dimn]

Удалите порты 4000 и 4004. Если после изменений затыки не пропадут показывайте лог викарда

[vano5011]

Просто оставить
multiport = 3999
?
спс. буду наблюдать.

[fed]

Сообщение от uv6hez

Так я и имел ввиду поменять имидж на Энигму, может не совсем понятно изложил... Домику поищу, спасибо.
Страничку о викард-плагины читал.
Собственно вопрос-то возник из-за того, что есть эти плагины под разные Дримы, а вот 800 не видно. Поэтому и пытаю вас имеет-ли смысл эаниматься с моим или он уже так устарел, что в утиль?

для вас может и сложно всё это, я бы сделал. Все от интереса и от умения зависит

[Lucky]

Постjянно вылазит

03:00:32 192.168.1.191 ntv3999: check ncd_read error=-3

после реконнет skyway nano3 wicard 1.19

[dimn]

Сообщение от Lucky

Постjянно вылазит

после реконнет skyway nano3 wicard 1.19

На скольких ресиверах прописан ваш конфиг wicard?

[vano5011]

14:19:42.596 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (684/684/684 ms)
14:19:42.598 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:19:52.292 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (312/313/313 ms)
14:20:02.450 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (335/340/342 ms)
14:20:12.451 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (319/319/320 ms)
14:20:22.563 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (386/386/386 ms)
14:20:32.503 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (278/279/279 ms)
14:20:42.621 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (438/438/438 ms)
14:20:52.576 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (302/303/303 ms)
14:21:02.626 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (362/362/362 ms)
14:21:02.657 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:21:12.668 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (362/363/363 ms)
14:21:12.669 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:21:22.699 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (359/361/361 ms)
14:21:32.705 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (364/365/365 ms)
14:21:32.707 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:21:42.693 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (367/368/368 ms)
14:21:42.694 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:21:52.757 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (352/353/353 ms)
14:21:52.765 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
14:22:02.705 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (348/349/349 ms)
14:22:02.706 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0


Вот лог ,выше просили. порты удалил, работало, сейчас пошли прерывания.

Заметил, на первом хд нормально, на россия хд затыки. И при переключении на россию пауза дольше.

[dimn]

сервер какой ?

[vano5011]

rlst4.dwbl.tv Выше- настройки.(вчера писал)
но с MGCAMD работает нормально.

[dimn]

можно лог wicard с момента старта?

[elmar]

Vu solo hd -wicard-все пакеты показывают.Только Rtvi не показывает,хотя. Ртви наше кино и ртви телеклуб показывают.У него что другой идент?

[vano5011]

15:10:08.340 wicardd: wicardd-sh4 version 1.18 neosheen (Aug 25 2014) http://wicard.tv
15:10:08.341 wicardd: Build options: [AutoConf] [TuxBox SCI] [DVBAPI] [STAPI] [WEBIF] [ExMLog] [TWIN]
15:10:08.341 wicardd: disabling internal CAS - -1
15:10:08.342 under_app_detect: procname: linuxrc, daemonize = 0
15:10:08.342 under_app_detect: PPID: 0
15:10:08.345 rlst: Filter object created.
15:10:08.346 rlst1: Filter object created.
15:10:08.347 name3999: activity_timeout = 9000 ms
15:10:08.348 name3999: using default secure key
15:10:08.348 name3999: not decoded cache initialized, size: 64, ttl: 3000
15:10:08.349 wicardd: creating default balancer.
15:10:08.350 default: [balancer] chain key missed, creating default chain including all readers.
15:10:08.350 default: balancer object created, 1 stage(s).
15:10:08.351 name3999: reader thread started, pid 1563, tid 696358088
15:10:08.353 DVB: Detected API: DVBAPI3
15:10:08.362 DVB0[DVBAPI3]: starting camd.socket handler thread
15:10:08.364 wicardd: registered 2 filter(s), 1 reader(s), 1 balancer(s), 0 tuner(s) and 0 server(s)
15:10:08.364 wicardd: loaded 0 user account(s)
15:10:08.364 wicardd: main thread, pid 1562, tid 694947840
15:10:08.365 DVB0[DVBAPI3]: DVB handler thread started, pid 1564, tid 697889992
15:10:08.422 wicardd: Discovery thread terminated.
15:10:08.853 name3999: connect to rlst4.dwbl.tv:3999, user=vano5011, pass=******, key=[0102030405060708091011121314]
15:10:09.104 name3999: Server detected: WiCard
15:10:09.174 name3999: CAID 0500, providers 1, UA 0000000000000000
15:10:09.174 name3999: provider 0: id 060A00, SA 0000000000000000
15:10:09.174 name3999: auto update disabled
15:10:09.175 name3999: provider data updated
15:10:09.175 name3999: reconnecting... connected
15:10:16.924 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (307/308/308 ms)
15:10:26.968 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (291/292/292 ms)
15:10:37.128 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (372/372/372 ms)
15:10:37.129 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:10:47.088 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (344/344/362 ms)
15:10:47.089 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:10:57.105 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (313/314/314 ms)

[dimn]

Сообщение от elmar

Vu solo hd -wicard-все пакеты показывают.Только Rtvi не показывает,хотя. Ртви наше кино и ртви телеклуб показывают.У него что другой идент?

да. 051A00


to vano5011 версию wicard 1.19 пробуйте

[alekssat]

Сообщение от vano5011

rlst4.dwbl.tv Выше- настройки.(вчера писал)
но с MGCAMD работает нормально.

Поставьте в конфиге
[dvb]
active = 1
type = auto
filter = rlst,rlst1
sdt = 1
ecm_info = 2

вместо auto DVBAPI3

[dvb]
active = 1
type = DVBAPI3
filter = rlst,rlst1
sdt = 1
ecm_info = 2

и сделайте рестарт эму

[vano5011]

DVBAPI3 не помогло.

15:56:33.392 wicardd: wicardd-sh4 version 1.19 beelive (Dec 28 2015) http://wicard.tv
15:56:33.393 wicardd: Build options: [AutoConf] [TuxBox SCI] [DVBAPI] [STAPI] [WEBIF] [ExMLog] [TWIN]
15:56:33.411 wicardd: disabling internal CAS - -1
15:56:33.411 under_app_detect: procname: linuxrc, daemonize = 0
15:56:33.412 under_app_detect: PPID: 0
15:56:33.415 rlst: Filter object created.
15:56:33.416 rlst1: Filter object created.
15:56:33.417 name3999: activity_timeout = 9000 ms
15:56:33.417 name3999: using default secure key
15:56:33.418 name3999: not decoded cache initialized, size: 64, ttl: 3000
15:56:33.419 name4000: activity_timeout = 9000 ms
15:56:33.419 name4000: using default secure key
15:56:33.419 name4000: not decoded cache initialized, size: 64, ttl: 3000
15:56:33.420 wicardd: creating default balancer.
15:56:33.421 default: [balancer] chain key missed, creating default chain including all readers.
15:56:33.421 default: balancer object created, 1 stage(s).
15:56:33.422 name3999: reader thread started, pid 1389, tid 696358088
15:56:33.422 name4000: reader thread started, pid 1390, tid 697406664
15:56:33.423 DVB: Detected API: DVBAPI3
15:56:33.431 DVB0[DVBAPI3]: starting camd.socket handler thread
15:56:33.432 wicardd: registered 2 filter(s), 2 reader(s), 1 balancer(s), 0 tuner(s) and 0 server(s)
15:56:33.433 wicardd: loaded 0 user account(s)
15:56:33.433 wicardd: main thread, pid 1388, tid 694947840
15:56:33.434 DVB0[DVBAPI3]: DVB handler thread started, pid 1391, tid 698950856
15:56:33.492 wicardd: Discovery thread terminated.
15:56:33.924 name3999: connect to [scrubbed]
15:56:33.925 name4000: connect to [scrubbed]
15:56:34.192 name4000: Server detected: WiCard
15:56:34.193 name3999: Server detected: WiCard
15:56:34.268 name4000: CAID 0500, providers 1, UA 0000000000000000
15:56:34.268 name4000: provider 0: id 060C00, SA 0000000000000000
15:56:34.269 name4000: auto update disabled
15:56:34.269 name4000: provider data updated
15:56:34.270 name4000: reconnecting... connected
15:56:34.270 name3999: CAID 0500, providers 1, UA 0000000000000000
15:56:34.270 name3999: provider 0: id 060A00, SA 0000000000000000
15:56:34.271 name3999: auto update disabled
15:56:34.271 name3999: provider data updated
15:56:34.271 name3999: reconnecting... connected
15:56:42.330 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (133/134/134 ms)
15:56:43.941 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (326/327/327 ms)
15:56:43.943 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:56:54.033 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (325/326/327 ms)
15:56:54.034 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:57:04.069 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (390/390/390 ms)
15:57:04.070 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:57:14.298 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (583/583/584 ms)
15:57:24.108 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (364/364/369 ms)
15:57:34.193 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (315/316/316 ms)
15:57:44.191 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (320/322/324 ms)
15:57:44.193 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
15:57:54.214 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (349/349/349 ms)
15:57:54.215 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0

и 19 не помог

закончилась передача с олимпиады и затыки перестали.

[alekssat]

Сообщение от vano5011

закончилась передача с олимпиады и затыки перестали.

У Вас на приёмнике родной имидж SPARK или Enigma2 ?

[vano5011]

spark

[alekssat]

Сообщение от vano5011

spark

попробуйте

[dvb]
filter = rlst1,rlst2
ecm_info = 0
type = DVBAPI3
auto_update = 1
debug = 0

[vano5011]

попробую, только когда опять начнет затыкать. Сейчас нормально. от передач зависит. уже сегодня пробовал так:
[dvb]
active = 1
type = DVBAPI3
filter = rlst,rlst1
sdt = 1
ecm_info = 2
не помогало.

Начались новости и пошли затыки.
поменял прошивку спарка и изменил
filter = rlst,rlst1
ecm_info = 0
type = DVBAPI3
auto_update = 1
debug = 0

я думаю написав
filter = rlst1,rlst2
вы ошиблись?

17:46:53.526 wicardd: wicardd-sh4 version 1.19 beelive (Dec 28 2015) http://wicard.tv
17:46:53.527 wicardd: Build options: [AutoConf] [TuxBox SCI] [DVBAPI] [STAPI] [WEBIF] [ExMLog] [TWIN]
17:46:53.527 wicardd: disabling internal CAS - -1
17:46:53.528 under_app_detect: procname: linuxrc, daemonize = 0
17:46:53.528 under_app_detect: PPID: 0
17:46:53.531 rlst: Filter object created.
17:46:53.532 rlst1: Filter object created.
17:46:53.533 name3999: activity_timeout = 9000 ms
17:46:53.533 name3999: using default secure key
17:46:53.533 name3999: not decoded cache initialized, size: 64, ttl: 3000
17:46:53.534 name4000: activity_timeout = 9000 ms
17:46:53.535 name4000: using default secure key
17:46:53.535 name4000: not decoded cache initialized, size: 64, ttl: 3000
17:46:53.536 wicardd: creating default balancer.
17:46:53.536 default: [balancer] chain key missed, creating default chain including all readers.
17:46:53.536 default: balancer object created, 1 stage(s).
17:46:53.537 name3999: reader thread started, pid 1780, tid 696358088
17:46:53.537 name4000: reader thread started, pid 1781, tid 697406664
17:46:53.549 DVB0[DVBAPI3]: starting camd.socket handler thread
17:46:53.550 wicardd: registered 2 filter(s), 2 reader(s), 1 balancer(s), 0 tuner(s) and 0 server(s)
17:46:53.551 wicardd: loaded 0 user account(s)
17:46:53.551 wicardd: main thread, pid 1779, tid 694947840
17:46:53.552 DVB0[DVBAPI3]: DVB handler thread started, pid 1782, tid 698950856
17:46:53.609 wicardd: Discovery thread terminated.
17:46:54.039 name3999: connect to [scrubbed]
17:46:54.040 name4000: connect to [scrubbed]
17:46:54.292 name3999: Server detected: WiCard
17:46:54.293 name4000: Server detected: WiCard
17:46:54.366 name4000: CAID 0500, providers 1, UA 0000000000000000
17:46:54.368 name4000: provider 0: id 060C00, SA 0000000000000000
17:46:54.368 name4000: auto update disabled
17:46:54.368 name4000: provider data updated
17:46:54.368 name4000: reconnecting... connected
17:46:54.369 name3999: CAID 0500, providers 1, UA 0000000000000000
17:46:54.370 name3999: provider 0: id 060A00, SA 0000000000000000
17:46:54.370 name3999: auto update disabled
17:46:54.370 name3999: provider data updated
17:46:54.371 name3999: reconnecting... connected
17:47:01.922 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (139/139/139 ms)
17:47:06.893 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (318/318/318 ms)
17:47:06.894 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
17:47:16.918 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (316/317/318 ms)
17:47:26.884 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (287/287/288 ms)
17:47:37.042 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (326/328/328 ms)
17:47:47.006 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (318/319/319 ms)
17:47:57.004 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (289/289/290 ms)
17:48:07.001 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (276/277/277 ms)
17:48:17.002 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (328/328/328 ms)
17:48:27.002 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (279/279/279 ms)
17:48:37.085 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (315/318/318 ms)
17:48:47.102 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (344/344/344 ms)
17:48:57.084 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (315/315/316 ms)
17:49:07.163 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (331/331/331 ms)
17:49:17.151 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (344/348/348 ms)
17:49:27.164 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (315/316/316 ms)
17:49:37.153 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (338/339/339 ms)
17:49:47.129 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (283/284/284 ms)
17:49:57.125 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (253/256/261 ms)
17:50:07.125 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (243/244/244 ms)
17:50:07.126 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
17:50:17.112 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (296/296/296 ms)
17:50:17.113 DVB0[DVBAPI3]: both CWs changed!!! demux_id 0
17:50:27.244 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (425/426/426 ms)
17:50:37.189 name3999: 2 ECM81 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (296/309/310 ms)
17:50:47.190 name3999: 2 ECM80 (0500:060A00/4E8A.0) for DVB0[DVBAPI3] decoded (280/280/280 ms)

[alekssat]

Сообщение от vano5011

Начались новости и пошли затыки.
поменял прошивку спарка и изменил
filter = rlst,rlst1
ecm_info = 0
type = DVBAPI3
auto_update = 1
debug = 0

я думаю написав
filter = rlst1,rlst2
вы ошиблись?

да, ошибся (

[Serg66]

vano5011
зачем снова 2 порта прописали? конфиг полностью показывайте