01.07.2010, 03:06
|
#9
|
абонент
Регистрация: 16.05.2009
Сообщения: 243
|
нашел ещё один CAM по описанию должен принимать протоколы newcam и cs3xxx , посмотрите его по моему мнению легче настроить, не дайдте бедняге помереть
oscam.conf
Цитата:
#
# main configuration
#
[global]
#-------------
# general
nice = -1
waitforcards = 0
preferlocalcards = 0
#-------------
# logging
disablelog = 1
maxlogsize = 1000
logfile = /var/oscam/log/oscam.log
disableuserfile = 1
usrfile = /var/oscam/log/user.log
pidfile = /var/run/oscam.pid
#-------------
# monitor
[monitor]
port = 0
#port = 988
aulow = 120
monlevel = 1
#-------------
# web interface
[webif]
httpport = 8888
httpuser = user
httppwd = password
# access is allowed only from these IP
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255
# access allowed from this dynamic client
#httpdyndns = myhostname.dyndns.com
#-------------
# DVB API
[dvbapi]
enabled = 1
boxtype = dreambox
user = dvbapi_qboxhd
priority = 0500:024400,1803:000000,183d:000000
au = 1
#-------------
# protocols
# these are used for oscam used as a SERVER
# if oscam is used as a CLIENT connecting remote server see oscam.server file
# --- protocols examples ---
#[cccam]
#port = 12000
#version = 2.0.11
#build = 1234
#reshare = 2
#[camd35]
#port = 30000
#suppresscmd08 = 1
#[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0 300:FFFFFF
#[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255
#[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0 300:FFFFFF
#[gbox]
#password = password1
#maxdist = 4
#cardinfos = card.infos
#ignorelist = ignore.list
#onlineinfos = online.infos
#locals = 01000000,02000000,0300FFFF
#[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300
|
oscam.user
Цитата:
#
# user configuration using oscam as SERVER for remote client
# (if you use oscam as simple CLIENT connecting remote server, see oscam.server)
#
# simplest account
#[account]
#User = john
#pwd = PASSword
#group = 1
# ================================================== ==========
# DON'T CHANGE THIS USER: it manage EMM forward to readers
# You can enable/disable EMM forward to cards setting "AU"
# see docs/oscam.user
[account]
user = dvbapi_qboxhd
group = 1
au = 1
# ================================================== ==========
# --- user examples ---
# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
#[account]
#user = user1
#pwd = password1
#monlevel = 0
#uniq = 1
#group = 1
#au = reader1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
#caid = 0100
# user for group 2 with monitor access, AU enabled
#[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 2 without monitor access, AU disabled, account disabled
#[account]
#user = user3
#pwd = password3
#disabled = 1
#group = 2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents
#[account]
#user = user4
#pwd = password4
#monlevel = 0
#uniq = 1
#group = 3
#ident = 0300:000000,FFFFFF;0400:FFFFFF
#caid = 0300
|
__________________
DB 900 UHD @ Merlin 4.0 , полный пакет+ IPtv
|
|
|