mpcs ничего не показывает что делать?
2010/01/12 21:30:59 1092 s >> STREAMBOARD << mp-cardserver started
2010/01/12 21:30:59 1092 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/01/12 21:30:59 1092 s signal handling initialized (type=sysv)
2010/01/12 21:30:59 1092 s 2719 service-id's loaded
2010/01/12 21:30:59 1092 s 28 lengths for caid guessing loaded
2010/01/12 21:30:59 1092 s monitor: disabled
2010/01/12 21:30:59 1092 s camd 3.3x: disabled
2010/01/12 21:30:59 1092 s camd 3.5x: disabled
2010/01/12 21:30:59 1092 s cs378x: disabled
2010/01/12 21:30:59 1092 s newcamd: disabled
2010/01/12 21:30:59 1092 s radegast: disabled
2010/01/12 21:30:59 1092 s logger started (pid=3564)
2010/01/12 21:30:59 1092 s resolver started (pid=2528, delay=30 sec)
2010/01/12 21:30:59 1092 s proxy started (pid=2356, server=213.155.7.144)
2010/01/12 21:30:59 1092 s can't open file "./mpcs.ac" (errno=2) anti-cascad
ing table not loaded
2010/01/12 21:30:59 2356 p02 proxy 213.155.7.144:4000 newcamd525 (fd=4)
2010/01/12 21:30:59 1092 s anticascader started (pid=3092, delay=2 min)
2010/01/12 21:30:59 1092 s serial: initialized (pid=3472, auto@/dev/ttyS2)
2010/01/12 21:31:06 3472 c01 detected dsr9500-extended type receiver
2010/01/12 21:31:06 3472 c01 plain dsr9500-client 127.0.0.1 granted (tuner, au
=0)
2010/01/12 21:31:06 2356 p02 server 213.155.7.144:4000 caid: 0500
2010/01/12 21:31:06 2356 p02 provider #0: 023700
2010/01/12 21:31:06 2356 p02 provider #1: 030600
2010/01/12 21:31:07 3472 c01 tuner (0500&023700/2A3A/4A:0418): found (872 ms)
by ntvplus
настройки
[global]
Nice = -1
#LogFile = log
#LogFile = /dev/tty
ClientTimeout = 5
LogFile = stdout
[serial]
Device=/var/log/mpcs://tuner@/dev/ttyS2?delay=1&timeout=2000
[reader]
Label = ntvplus
Protocol = newcamd
Key = 0102030405060708091011121314
Device = 213.155.7.144,4000
Account = #########
Fallback = 0
Group = 1
ReconnectTimeout = 20
InactivityTimeOut = 30
#### created by mpcs-i ####
[account]
User=tuner
Pwd=tuner
#Uniq = 1
Group=1
|