народ,помогите..
парюсь уже какой день
не показывает и все....
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 00 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 530
#N: { 02 }
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 02 } 192.168.178.26 514
L: { 01 }192.168.178.26 514
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
#H: { 07 }
H: { 00 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 01 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
CWS = rlst15.dwbl.tv 4008 xxxxxx xxxx01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
#CWS = rlst15.dwbl.tv 4500 xxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS = rlst15.dwbl.tv 4032 xxxxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS_CONNECT_TIMEOUT = 120
CWS_KEEPALIVE = yes
log
Aug 17 19:30:30 192.168.178.46 [mg0] stoping camd..
Aug 17 19:30:30 192.168.178.46 [mgcamd] emm stopped
Aug 17 19:30:32 192.168.178.46 [mgcamd] signal 15 received
Aug 17 19:31:32 192.168.178.46 [mg] Net:0:1:2:5s Show ecm:0, emm:0 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:0 Log:1:192.168.178.26:514 Reread:4
Aug 17 19:31:32 192.168.178.46 [mg] Ecm cache time: 15
Aug 17 19:31:32 192.168.178.46 Box type: dbox2
Aug 17 19:31:32 192.168.178.46 Keys readed
Aug 17 19:31:33 192.168.178.46 [mgcam] emm thread started
Aug 17 19:32:00 192.168.178.46 got 58 cmd 9F
Aug 17 19:32:00 192.168.178.46
Aug 17 19:32:00 192.168.178.46 [mg0] service B index 0 pmt pid 0 (1), pids: video 0x06FF, audio 0x0700 0x0703
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1744 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1844 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1B44 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1F44 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1A44 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 [mgcamd] emm started
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1000 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1502 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1009 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000
Aug 17 19:33:19 192.168.178.46
Aug 17 19:33:19 192.168.178.46
Aug 17 19:33:24 192.168.178.46
Aug 17 19:33:24 192.168.178.46
Aug 17 19:38:01 192.168.178.46
Aug 17 19:38:01 192.168.178.46
Aug 17 19:38:20 192.168.178.46
Aug 17 19:38:20 192.168.178.46