Поставил mgcamd 1,37 а толку опять ноль.
Господа модераторы посмотрите опытным взглядом , в чем причина и возможно ли с таким пингом смотреть шару и если возможно где какие изменения в настройках сделать
Пинг сервера
85.17.156.109 - 0 | 38 | 38 | 165 | 379 | 1101 | 212
Лог
Mar 29 11:23:25 192.168.0.3 [mg1] service 2F46 index 1 pmt pid 0 (1)
Mar 29 11:23:25 192.168.0.3 CaPID: 0x0BBA ProvID: 030600
Mar 29 11:23:25 192.168.0.3 CaPID: 0x0322 ProvID: 000000
Mar 29 11:23:25 192.168.0.3 CaPID: 0x0FA2 ProvID: 050B00
Mar 29 11:23:26 192.168.0.3 [mg1] network can't decode
Mar 29 11:23:26 192.168.0.3 [mg1] pid 0x0BBA failed to decode.
Mar 29 11:23:26 192.168.0.3 [mg1] network can't decode
Mar 29 11:23:26 192.168.0.3 [mg1] pid 0x0322 failed to decode.
Mar 29 11:23:26 192.168.0.3 [mg1] network can't decode
Mar 29 11:23:26 192.168.0.3 [mg1] pid 0x0FA2 failed to decode.
Mar 29 11:24:35 192.168.0.3 [mg1] stoping camd..
Mar 29 11:24:36 192.168.0.3 [mg1] service 2F45 index 1 pmt pid 0 (1)
Mar 29 11:24:36 192.168.0.3 CaPID: 0x0BB9 ProvID: 030600
Mar 29 11:24:36 192.168.0.3 CaPID: 0x0321 ProvID: 000000
Mar 29 11:24:36 192.168.0.3 CaPID: 0x0FA1 ProvID: 050B00
Mar 29 11:24:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:24:36 192.168.0.3 [mg1] pid 0x0BB9 failed to decode.
Mar 29 11:24:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:24:36 192.168.0.3 [mg1] pid 0x0321 failed to decode.
Mar 29 11:24:37 192.168.0.3 [mg1] network can't decode
Mar 29 11:24:37 192.168.0.3 [mg1] pid 0x0FA1 failed to decode.
Mar 29 11:25:41 192.168.0.3 [newcamd] Connection to 85.17.156.109:4000 failed (189006ms)
Mar 29 11:28:54 192.168.0.3 STAPI filter set error 81 pid bb9
Mar 29 11:39:01 192.168.0.3 [mg1] stoping camd..
Mar 29 11:40:06 192.168.0.3 tuxbox mgcamd v1.37 no mixvt (comByLeo Sep 29 2011 23:32:23)
Mar 29 11:40:06 192.168.0.3 [mg] Net:1:1:2:9s Show ecm:1, emm:1 Up:1 Au:0 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.0.2:514 Reread:0
Mar 29 11:40:06 192.168.0.3 [mg] Ecm cache time: 0
Mar 29 11:40:06 192.168.0.3 Box type: octagon/v1.10
Mar 29 11:40:06 192.168.0.3 Conax.Key error 2: No such file or directory
Mar 29 11:40:06 192.168.0.3 Keys readed
Mar 29 11:40:06 192.168.0.3 AutoRoll.Key error 2: No such file or directory
Mar 29 11:40:06 192.168.0.3 Conax.Key error 2: No such file or directory
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:023700
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:040610
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:040620
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:050100
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:008000
Mar 29 11:40:06 192.168.0.3 ignore prov 0500:042100
Mar 29 11:40:06 192.168.0.3 ignore caid 4AE0
Mar 29 11:40:06 192.168.0.3 priority prov 0500:040600
Mar 29 11:40:06 192.168.0.3 priority prov 0500:030600
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 0000:000000:0000
Mar 29 11:40:06 192.168.0.3 [config] newcamd route = nik151162:85.17.156.109:4000 server cardserv # �￮ ￠￨￭￣
Mar 29 11:40:06 192.168.0.3 newcamd keep alive: 300, incoming port: 0
Mar 29 11:40:06 192.168.0.3 [mgcam] emm thread started
Mar 29 11:40:06 192.168.0.3 [newcamd] Connecting to 85.17.156.109:4000...
Mar 29 11:40:06 192.168.0.3 [newcamd] Can't open host 85.17.156.109:4000
Mar 29 11:40:35 192.168.0.3 [mg1] service 2F45 index 1 pmt pid 0 (1)
Mar 29 11:40:35 192.168.0.3 CaPID: 0x0BB9 ProvID: 030600
Mar 29 11:40:35 192.168.0.3 CaPID: 0x0321 ProvID: 000000
Mar 29 11:40:35 192.168.0.3 CaPID: 0x0FA1 ProvID: 050B00
Mar 29 11:40:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:40:36 192.168.0.3 [mg1] pid 0x0BB9 failed to decode.
Mar 29 11:40:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:40:36 192.168.0.3 [mg1] pid 0x0321 failed to decode.
Mar 29 11:40:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:40:36 192.168.0.3 [mg1] pid 0x0FA1 failed to decode.
Mar 29 11:41:17 192.168.0.3 [mg1] stoping camd..
Mar 29 11:50:46 192.168.0.3 [mgcamd] signal 15 received
Mar 29 11:53:53 192.168.0.3 tuxbox mgcamd v1.37 no mixvt (comByLeo Sep 29 2011 23:32:23)
Mar 29 11:53:53 192.168.0.3 [mg] Net:1:1:2:9s Show ecm:1, emm:1 Up:1 Au:0 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.0.2:514 Reread:0
Mar 29 11:53:53 192.168.0.3 [mg] Ecm cache time: 0
Mar 29 11:53:53 192.168.0.3 Box type: octagon/v1.10
Mar 29 11:53:53 192.168.0.3 Conax.Key error 2: No such file or directory
Mar 29 11:53:53 192.168.0.3 Keys readed
Mar 29 11:53:53 192.168.0.3 AutoRoll.Key error 2: No such file or directory
Mar 29 11:53:53 192.168.0.3 Conax.Key error 2: No such file or directory
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:023700
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:040610
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:040620
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:050100
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:008000
Mar 29 11:53:53 192.168.0.3 ignore prov 0500:042100
Mar 29 11:53:53 192.168.0.3 ignore caid 4AE0
Mar 29 11:53:53 192.168.0.3 priority prov 0500:040600
Mar 29 11:53:53 192.168.0.3 priority prov 0500:030600
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 0000:000000:0000
Mar 29 11:53:53 192.168.0.3 [config] newcamd route = nik151162:85.17.156.109:4000 server cardserv # �￮ ￠￨￭￣
Mar 29 11:53:53 192.168.0.3 newcamd keep alive: 300, incoming port: 0
Mar 29 11:53:53 192.168.0.3 [mgcam] emm thread started
Mar 29 11:53:53 192.168.0.3 [newcamd] Connecting to 85.17.156.109:4000...
Mar 29 11:54:01 192.168.0.3 [mg1] service 138D index 1 pmt pid 0 (1)
Mar 29 11:54:01 192.168.0.3 [mg1] No supported encryption system found
Mar 29 11:54:01 192.168.0.3 [mg1] stopped
Mar 29 11:54:07 192.168.0.3 [mg1] stoping camd..
Mar 29 11:54:11 192.168.0.3 [mg1] service 138D index 1 pmt pid 0 (1)
Mar 29 11:54:11 192.168.0.3 [mg1] No supported encryption system found
Mar 29 11:54:11 192.168.0.3 [mg1] stopped
Mar 29 11:54:12 192.168.0.3 [mg1] stoping camd..
Mar 29 11:54:14 192.168.0.3 [mg1] service 138D index 1 pmt pid 0 (1)
Mar 29 11:54:14 192.168.0.3 [mg1] No supported encryption system found
Mar 29 11:54:14 192.168.0.3 [mg1] stopped
Mar 29 11:54:33 192.168.0.3 [mg1] stoping camd..
Mar 29 11:54:35 192.168.0.3 [mg1] service 2B66 index 1 pmt pid 0 (1)
Mar 29 11:54:35 192.168.0.3 CaPID: 0x07DA ProvID: 040600
Mar 29 11:54:35 192.168.0.3 CaPID: 0x0BC2 ProvID: 030600
Mar 29 11:54:35 192.168.0.3 CaPID: 0x032A ProvID: 000000
Mar 29 11:54:35 192.168.0.3 CaPID: 0x0FAA ProvID: 050B00
Mar 29 11:54:35 192.168.0.3 [mg1] No viaccess key(s) found for id 40600 keynr 08
Mar 29 11:54:35 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:35 192.168.0.3 [mg1] pid 0x07DA failed to decode.
Mar 29 11:54:35 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:35 192.168.0.3 [mg1] pid 0x0BC2 failed to decode.
Mar 29 11:54:35 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:35 192.168.0.3 [mg1] pid 0x032A failed to decode.
Mar 29 11:54:36 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:36 192.168.0.3 [mg1] pid 0x0FAA failed to decode.
Mar 29 11:54:57 192.168.0.3 [mg1] stoping camd..
Mar 29 11:54:57 192.168.0.3 [mg1] service 2B63 index 1 pmt pid 0 (1)
Mar 29 11:54:57 192.168.0.3 CaPID: 0x07D7 ProvID: 040600
Mar 29 11:54:57 192.168.0.3 CaPID: 0x0BBF ProvID: 030600
Mar 29 11:54:57 192.168.0.3 CaPID: 0x0327 ProvID: 000000
Mar 29 11:54:57 192.168.0.3 CaPID: 0x0FA7 ProvID: 050B00
Mar 29 11:54:57 192.168.0.3 [mg1] No viaccess key(s) found for id 40600 keynr 08
Mar 29 11:54:57 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:57 192.168.0.3 [mg1] pid 0x07D7 failed to decode.
Mar 29 11:54:57 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:57 192.168.0.3 [mg1] pid 0x0BBF failed to decode.
Mar 29 11:54:58 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:58 192.168.0.3 [mg1] pid 0x0327 failed to decode.
Mar 29 11:54:58 192.168.0.3 [mg1] network can't decode
Mar 29 11:54:58 192.168.0.3 [mg1] pid 0x0FA7 failed to decode.
Mar 29 11:56:05 192.168.0.3 [mg1] stoping camd..
Mar 29 11:56:43 192.168.0.3 [mg1] service 61B2 index 1 pmt pid 0 (1)
Mar 29 11:56:43 192.168.0.3 CaPID: 0x0031 ProvID: 000000
Mar 29 11:56:43 192.168.0.3 CaPID: 0x0029 ProvID: 000000
Mar 29 11:56:43 192.168.0.3 [mg1] network can't decode
Mar 29 11:56:43 192.168.0.3 [mg1] pid 0x0031 failed to decode.
Mar 29 11:56:43 192.168.0.3 [mg1] network can't decode
Mar 29 11:56:43 192.168.0.3 [mg1] pid 0x0029 failed to decode.
Mar 29 11:57:02 192.168.0.3 [newcamd] Connection to 85.17.156.109:4000 failed (28889ms)
Mar 29 11:57:54 192.168.0.3 [mg1] stoping camd..
Mar 29 11:58:38 192.168.0.3 [mg1] service 46BC index 1 pmt pid 0 (1)
Mar 29 11:58:38 192.168.0.3 CaPID: 0x07D8 ProvID: 040600
Mar 29 11:58:38 192.168.0.3 CaPID: 0x0BC0 ProvID: 030600
Mar 29 11:58:38 192.168.0.3 CaPID: 0x0328 ProvID: 000000
Mar 29 11:58:38 192.168.0.3 CaPID: 0x0FA8 ProvID: 050B00
Mar 29 11:58:38 192.168.0.3 [mg1] No viaccess key(s) found for id 40600 keynr 08
Mar 29 11:58:38 192.168.0.3 [mg1] network can't decode
Mar 29 11:58:38 192.168.0.3 [mg1] pid 0x07D8 failed to decode.
Mar 29 11:58:38 192.168.0.3 [mg1] network can't decode
Mar 29 11:58:38 192.168.0.3 [mg1] pid 0x0BC0 failed to decode.
Mar 29 11:58:38 192.168.0.3 [mg1] network can't decode
Mar 29 11:58:38 192.168.0.3 [mg1] pid 0x0328 failed to decode.
Mar 29 11:58:38 192.168.0.3 [mg1] network can't decode
Mar 29 11:58:38 192.168.0.3 [mg1] pid 0x0FA8 failed to decode.
Mar 29 11:59:17 192.168.0.3 [mg1] stoping camd..
Mar 29 11:59:22 192.168.0.3 [mg1] service 2F45 index 1 pmt pid 0 (1)
Mar 29 11:59:22 192.168.0.3 CaPID: 0x0BB9 ProvID: 030600
Mar 29 11:59:22 192.168.0.3 CaPID: 0x0321 ProvID: 000000
Mar 29 11:59:22 192.168.0.3 CaPID: 0x0FA1 ProvID: 050B00
Mar 29 11:59:22 192.168.0.3 [mg1] network can't decode
Mar 29 11:59:22 192.168.0.3 [mg1] pid 0x0BB9 failed to decode.
Mar 29 11:59:22 192.168.0.3 [mg1] network can't decode
Mar 29 11:59:22 192.168.0.3 [mg1] pid 0x0321 failed to decode.
Mar 29 11:59:22 192.168.0.3 [mg1] network can't decode
Mar 29 11:59:22 192.168.0.3 [mg1] pid 0x0FA1 failed to decode.
Mar 29 12:00:25 192.168.0.3 [mg1] stoping camd..
Mar 29 12:00:26 192.168.0.3 [mg1] service 138D index 1 pmt pid 0 (1)
Mar 29 12:00:26 192.168.0.3 [mg1] No supported encryption system found
Mar 29 12:00:26 192.168.0.3 [mg1] stopped
Mg_sfg
CWS = 85.17.156.109 4000 nik151162 xxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv # �￮ ￠￨￭￣
CWS_CONNECT_TIMEOUT = 2100
CWS_KEEPALIVE =300
Newcamd
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 5 30
# network ecm timeout in seconds
K: { 09 }
# newcamd dead routes connect retry, sec
Q: { 150 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 192.168.0.2 514 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of m
# for openbox/elanvision users with remote shares make sense to set it higher th
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit,
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 04 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }
Priority
#NTV+ ETELSAT 36E
V: { 04 06 00 }
V: { 03 06 00 } #ￎￒￂￋￒￜ ￒￓￒ ￒￅￌ ￓ ￊￎￃￎ ￅￂￅￛ c HD!!!, ￤￫ ￮￠￫￭ ￥￨￢￥￮￢-￥￥￭￮￨￬ ￥￣￮ ￢ ￨￣￭￮
# ignore viaccess providers
V: { 02 37 00}
V: { 04 06 10}
V: { 04 06 20}
V: { 05 01 00}
V: { 00 80 00}
V: { 04 21 00}
X: { 4A E0 }
# replace old with new {{ sid } { caid } { provid } { ecmpid } { newcaid } {
newprovid } { newecmpid }}
#ￍￒￂ+
R: {{ 2F4A } { 500 } { 030600 } { 0bbe } { 0 } { 0 } { 0 }} #HD MTV
R: {{ 2F45 } { 500 } { 030600 } { 0bb9 } { 0 } { 0 } { 0 }} #HD ￊ￨￭￮
R: {{ 2F46 } { 500 } { 030600 } { 0bba } { 0 } { 0 } { 0 }} #HD ￮
R: {{ 2F47 } { 500 } { 030600 } { 0bbb } { 0 } { 0 } { 0 }} #HD Life
R: {{ 2F48 } { 500 } { 030600 } { 0bbc } { 0 } { 0 } { 0 }} #HD Eurosport
R: {{ 2F49 } { 500 } { 030600 } { 0bbd } { 0 } { 0 } { 0 }} #HD Discovery
R: {{ 3715 } { 500 } { 030600 } { 0BB9 } { 0 } { 0 } { 0 }} #HD Nat Geo
R: {{ 3717 } { 500 } { 030600 } { 0bbb } { 0 } { 0 } { 0 }} #HD Mezzo Live
R: {{ 3716 } { 500 } { 030600 } { 0bba } { 0 } { 0 } { 0 }} #3D by
Panasonic
R: {{ 3718 } { 500 } { 030600 } { 0bbc } { 0 } { 0 } { 0 }} #HD Animal Planet
R: {{ 3719 } { 500 } { 030600 } { 0bbd } { 0 } { 0 } { 0 }} #HD ￔ￡￮￫
R: {{ 371a } { 500 } { 030600 } { 0bbe } { 0 } { 0 } { 0 }} #HD Nicolodeon
R: {{ 4E85 } { 500 } { 030600 } { 0bb9 } { 0 } { 0 } { 0 }} #HD Futbol2