Приобрел сие чудо техники.... Пытаюсь настроить Платформу, однако похвастаться ничем не могу. Все файлы скопировал, присвоил 755, mgcamd на ресивере запущен. Пока ничего не показывает. Подскажите, что не так.
Код:
# EMM messages
# 00 don't show any EMMs
(default)
# 01 show only valid EMMs
#
02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about
ecm
# 01 normal mode, show pids processed, decoded ecm and
cw
# 02 verbose mode, show valid and bad ECMs with
data
C: { 01 }
# AU
# 00 disable, no emm pids
processed
# 01 enable, emm pids always processed for
soft-au and shared cards
# 02 auto, emm started only if
channel cant be decoded
# 03 process emm pids for network
cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new
keys, default setting
# 02 update all keys (used for valid
PMK checking)
# 04 enable TPS au
# +
tps au pid
U: { 00 } 0x1ACB
# config files folder (softcam, autoroll,
ignore/priority)
# 00 files in
/var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no
network (default)
# 01 newcamd
netclient
# 02 radegast netclient
# 04
camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00
disable
# 01 retry every new ecm
# 02
try to connect to offline shares every Q: seconds
# 04 try
to detect and fast reconnect to lost (and not used atm)
server
# + XX messages number and YY seconds to
reconnect
# mg will reconnect to server, if no answer to
last XX ecm/keepalive or
# if no answer for last ecm or
keepalive sent for YY seconds
# set to 0 to disable
N: {
01 }
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3
(default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox,
radegast
P: { 02 }
# on screen display type
# 00 No OSD
(default)
# 01 neutrino
# 02
enigma
# 03 relook
# + user password
for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
#
04 show decoding failed / fta
# 08 show emm keys
update
# + web port to use for osd
S: { 00 } 80
# Log option, summ of:
# 00 off
#
01 network udp log
# 02 log to
console
# 04 file, appended ! delete it by yourself, before
it eat all your hdd
# + IP udp-port log-file-name
L: {
04 } 192.168.1.3 514 /var/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache
will take *only* 240-400kb of memory,
# for openbox/elanvision users with
remote shares make sense to set it higher than default value,
# to not
hammer cards while timeshifting or playing crypted recordings.
E: { 3600
}
# cache option, summ of:
# 00 Off
(default)
# 01 Ecm pids cache, store pids used to decode in
/tmp/ca_cache.list at exit, load at startup, same syntax as
restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same
emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No
(default)
# 01 reread config file on channel change
(including priority and ignore, but not replace/cache)
# 02
reread SoftCam.Key on channel change
# 04 reread
SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug
emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network
login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log
messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type
detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04
relook
# 05 openbox
B: { 12 }
Код:
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg]
Net:1:1:2:5s Show ecm:1, emm:0 Up:0 Au:0 Dir:0 Osd:no:80:0 Cache:7
Log:4:192.168.1.3:514 Reread:0
[mg] Ecm cache time: 3600
Box type:
openbox/stapi
Conax.Key error 2: No such file or directory
SoftCam.Key
error 2: No such file or directory
AutoRoll.Key error 2: No such file or
directory
Conax.Key error 2: No such file or directory
[config] newcamd
route = Andy:91.194.76.159:4014 server cardserv
newcamd keep alive: 300,
incoming port: 21000
[mgcam] emm thread started
[newcamd] Connecting to
91.194.76.159:4014...
[mg1] service 2C7 index 1 pmt pid 0 (1)
[mg1] No
supported encryption system found
[mg1] stopped
[newcamd] Connection to
91.194.76.159:4014 failed (291ms)
[mg1] stoping camd..
[mg1] service 12D
index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1]
stopped
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0
(1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1]
stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] ECM: CaID:
0x4AE1 -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1
-> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid
0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079
failed to decode.
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0
(1)
[mg1] No supported encryption system found
[mg1] stopped