RELSat - Настройка XcamClient (Openbox, Skyway, Octagon)

В общем виде конфиг (cardclient.conf) для XcamClient выглядит так:

Код:

#

# Comment lines can start with # or ;

#

# every client line starts with the client name, followed by some arguments:

# 'hostname' is the name of the server

# 'port'     is the port on the server

# 'emm'      is a flag to allow EMM transfers to the server

#            (0=disabled 1=enabled)

# 'caid'     (optional) caid on which this client should work

# 'mask'     (optional) mask for caid e.g. caid=1700 mask=FF00 would allow

#            anything between 1700 & 17FF.

#            Default is 1700 & FF00. If only caid is given mask is FFFF.

#            You may give multiple caid/mask values comma separated

#            (e.g. 1702,1722,0d0c/ff00).

# 'username' is the login username

# 'password' is the login password

#

# radegast client

radegast:hostname:port:emm/caid/mask

#

# aroureos client

# 'hexbase'

# 'hexserial' card data for which EMM updates should be send

aroureos:hostname:port:emm/caid/mask:hexbase:hexserial

#

# camd33 client (tcp protocol)

# 'aeskey'   is the AES key (32bytes), disable encryption if missing

camd33:hostname:port:emm/caid/mask:username:password:aeskey

#

# camd35 client (udp protocol)

camd35:hostname:port:emm/caid/mask:username:password

#

# cardd client

cardd:hostname:port:emm/caid/mask:username:password

#

# buffy client

# 'aeskey'   is the AES key (32bytes), disable encryption if missing

buffy:hostname:port:emm:username:password:aeskey

#

# newcamd client

# 'cfgkey' is the config key (28bytes)

#newcamd:127.0.0.1:32000:0/caid/mask:username:password:cfgKey

#newcamd:192.168.10.107:32000:0/0000/0000:dummy:dummy:0102030405060708091011121314

#newcamd:127.0.0.1:32000:0/0000/0000:dummy:dummy:0102030405060708091011121314

#

# gbox client

#

# NOTE: hostname & port will be ignore. GBOX must be runnning on the local

# machine. For convinience you should choose localhost:8004

gbox:hostname:port:emm/caid/mask

#

# cccam client (via LD_PRE_LOAD wrapper)

#

# NOTE: hostname will be ignore. CCcam must be runnning on the local machine

# 'socket' is the name of the camd socket file. For multiple cards add %d

# into the string. This will be replaced with the number 0-3.

# e.g. /var/emu/chroot%d/tmp/camd.socket

cccam:hostname:port:emm/caid/mask:socket

#

# (the real) cccam client

#

# NOTE: this is a real client. You don't need to have CCcam running on local

# machine.



cccam2:hostname:port:1/1833/1702:username:pass

как правильно настроить данный конфиг по newcamd-протоколу для пакета "Весь 36E"

?

Как я пониимаю, нужно правильно указать соответствие
Спутниковый провайдер - Порт - caid - маска (если иденты по разным портам у одного прова);
типа

Код:

newcamd:server:port1:0/0500/0000:login:pass:0102030405060708091011121314

P.s.: проще всего, если я, конечно, всё правильно понимаю, настраивать по camd35-протоколу - там всего один порт 10003 под все пакеты; и тогда будет примерно так:

Код:

camd35:server:10003:0/0/0:login:pass